1. Engineers

    Engineers! Claim your free membership
    on CrazyEngineers.io RIGHT NOW!

    Do not stay behind!

    Sign Up in < 10 Seconds

    Dismiss Notice

Mini Project Ideas For Mechanical Engineering Students

Discussion in 'Project Ideas & Seminar Topics' started by bhuvan, Jan 7, 2008.

  1. bhuvan

    bhuvan Newbie

    Engineering Discipline:
    I need ides about the mechanical mini projects . And needed some topics too. I've compiled a list of few mini project topics in mechanical engineering. Here's a list -

    1. Design interface of aircraft / automobile cockpit: Make it easier for human interaction.

    2. Study the dynamics of automobile ignition systems: Study the vibration levels of exhaust system and predict design parameters.

    3. Robotics : Design and develop a mini line-follower bot.

    4. Design a robot for the textile industry using SolidWorks software.
  2. rake

    rake Newbie

    I've this list of mini projects in mechanical engineering -

    1. Metal Detector
    2. Automatic Bar Feeding Mechanism
    3. Remote controlled wheel chair
    4. Fabrication Hydraulic press
    5. Fabrication of Automatic Cone Winding
    7. Vertical Axis Windmill
    8. Auto Gearing System
    9. Automatic Crane System
    10. Pneumatic Punch
    11. Sliding Table for Grinding Machine
    12. Pneumatic Comparator
    13. Gear Indicator for two Wheelers
    14. Pneumatic Hand Drilling
    15. CNC Thermo Coal Cutting Machine
    16. Inspection system using PC
    17. Fabrication for Slotting Machine
    18. Solar Based Oven
    19. Automatic Blanking Machine
    20. Fabrication of auto feed drilling machine
    21. Over Load Indicator for machines
    22. Fabrication of Wind Mill
    24. Chicken Skin Peeler
    25. Thermocoal cutting machine using CNC
    26. Fabrication of Spy robo
    27. Automatic steering controlled lead lamps
    28. Peddling Washing Machine
    29. Automatic Hammer Striker
    30. Multipurpose Tool Changer
    31. Fabrication of Sheet Metal Cutting
    32. Automatic gear display
    33. Hydraulic Screw Jack
    35. Automatic filling system
    36. Bottle Vending Machine
    37. Solar Water Heater
    38. Two Axis Sliding Table
    39. Electrical Spot Welding Machine
    40. Automatic Injection Molding
    41. Automatic Cone Releaser
    42. Tidal Power Plant
    43. Fabrication of Pipe Bending Machine
    44. Pneumatic Punching Machine
    46. Fabrication of Spring Rolling Machine
    47. Fabricating of Micro Holes Driller
    48. Battery Operated Portable Pump
    49. Auto Braking System
    50. Glass Cutting Machine
    52. Hydraulic Noodles Machine
    53. Library automation system
    54. Band Saw Cutting Machine
    55. Remote Controlled Screw jack
    56. Pneumatic Door Opener
    57. Fabrication of Yarn Pigment Tester
    58. Food process control station
    59. Hydraulic Power Pack
    60. Automatic Sealing Machine
    61. Electrified Two Axis Sliding Table
    62. Pneumatic Cylinder
    63. Fabrication of Oven
    64. Peddling pump
    65. Slave robots
    66. Pneumatic Hand Grinder
    67. Fabrication of Hydraulic Press
    68. Fabrication of voice operated wheel chair
    69. Sheet Metal Bend Removing Machine
    70. Mini Milling Machine
    71. Automatic Coil Winding Machine
    72. Automated Dimensioning Machine
    73. Hydro Pneumatic Vice
    74. Design of Effluent Treatment Plant
    75. Fabrication of Coil Winding Machine
    76. Power generation using Speed breaker
    77. Automatic car shutter
    78. Artificial arm
    79. Automatic Dimensioning Machine
    80. Automated Material Transferring System
    81. Manual Injection Molding
    82. Soft hand gear system
    83. Fabrication of Windmill Power Generator
    84. Salt water into pure water
    85. Pneumatic hag saw cutter
    86. Safety Locking System
    87. Automatic Poor Quality Rejecter
    88. Automatic ration system
    89. Machining status informer
    90. Process retrievals and its drilling operation
    91. Coin Vending Machine
    92. ABC controlling through switch
    93. Automatic bench marking system
    94. Single Axis Sliding Table
    95. Foot Step Pressure Electrical Power Generator
    96. Sheet Metal Bend removing Machine
    97. Jigs And Fixtures
    98. Conveyer for Quality control
    99. Electromagnetic Breaking System
    100. Fabrication of Tilt able Extension Ladder
    101. Contact less automatic door opener
    102. Operation identification system
    103. Remote Material Handler
    104. Fabrication of Pulverize
    105. Hydraulic Cylinder
    106. Power generation using Footsteps
    107. Indexing Table for Drilling Machine
    108. Auto hammer striker
    109. Single Cylinder Double Acting Pump
    110. Fabrication of Solid Fuel Fabrication machine
    113. Electronic Power Steering
    114. Automated lead screw jaws
    115. Rain activated wiper
    116. Motorized Power Jack
    117. Conveyer For Industries
    118. Automatic Quality Checking System
    119. CNC Bar Feeding Machine
    120. Automatic Quality Testing System
    121. Electronic Wise
    122. Jigs and Fixture
    123. Fabrication Hydraulic forklift
    124. Automatic Drilling Machine
    125. Fabrication of Key Way Milling Machine
    127. Agitator
    128. Automatic Sealing Machine
    129. Plant automation
    130. Automatic gear changer
    131. Hydraulic Scissor Jack
    #2 rake, Aug 7, 2008
    Last edited by a moderator: Dec 4, 2015
  3. kamaljeet

    kamaljeet Newbie

    1. Wind Energy Vehicle: Small Scale Vehicle.
    2. Wind Based Water Pump: Useful for farmers and energy saving.
    3. Automatic Vehicle Smoke Analyser: PUC control.
    4. Valve Regrinding Machine: Could be useful in local repairs.
    5. Two Wheeler with Propeller Shaft: Could improve the efficiency of the vehicle.
    6. Sterling Engine: A detailed study.
    7. Spray Painting Robot: Can find industrial applications.
    8. Single Cylinder Doubleacting Pump: Pump uses lesser mechanical and electrical power.
    9. Salt Water into Pure Water: Simple mechanical converter.
    10. Remote Controlled Drilling Machine: Mechanical arm controlled by Wi-Fi remote or Bluetooth.
    11. Pneumatic High Speed Reciprocting Hack Saw: Reducing the power consumption with improved blade design.
    12. Pneumatic Chapathi Machine: The Indian Roti-Maker; make sure they are circular in shape.
    13. Pedaling Dress Washing Machine: Should be able to handle delicate material.
    14. Pedal Controlled Mobile Charger cum Emergency Light: Mechanical - Electrical energy conversion.
    15. Multi Agri Cutter: Helping the farmers with low cost machine.
    16. License Scanning Automobile Security System: Electro mechanical machine to simplify RTO job.
    17. Industrial Motor Safety Controller: Monitors speed and other parameters.
    18. Hydraulic Grease Gun: Regularly used in large-scale industrial applications.
    19. Hydraulic Bending and Bend Removing Machine: Typically used in manufacturing of automobiles.
    20. Car Controlled System Operation: Could be a dashboard monitoring system.
    21. Voice Operated Fuel Injector: Vocal commands to control level of fuel injection.
    22. Check Post Vehicle Analyzer: Electronic scanner to perform auto-checks.
    23. Speed Vehicle Sensing: High speed motion sensors.
    24. Solar Automatic Mobile Charging: Self explanatory.
    25. Automatic Speed Control in Speed Limit Zone: Device will limit vehicle's speed automatically.
    26. Automatic Fuel Tank Filling System: Robotic arms fills fuel tank and monitors the fuel level.
    27. Automatic Speed Breaking Systems: Notice speed breaker and reduce vehicle speed appropriately.
    28. Car Theft Prevention Using Code Locking System: Auto-cop!
    29. VI Based Diesel Plant Automation: Complete automation of diesel plant automation.
    30. Microcontroller Based Vehicle Fare Meter: Simple microcontroller to control vehicle fare.
    31. Bus Backside Accident Alert System: Sensors mounted on dashboard (rear) for complete control.
    32. Backside Accident Alert System for Four Wheeler: Same system.
    33. Automobile Surveillance: Central GPS based monitor.
    34. Automatic Traffic Clearance during Emergency: Auto traffic controller using GPS.
    35. Automatic Call Taxi Meter: Use GPS and sensor data to calculate taxi fare.
    36. Automatic Saw Cutting: Advance cutting technologies for steel & metals.
    37. Model Highway Road Curve Finder: Notify the driver of the curves ahead.
    38. Fuzzy Logic Vehicle Traffic Regulation: Same as above.
    39. Vehicle Inmobilization System: Stop the engine in case of theft through remote command system.
    40. Digital Vehicle Fuel Level Indicator: Auto-indicate fuel level.
    41. Vehicle Due Immobilization Using PLC: Using PLC to control automobile engine.
    42. Digitized Vehicle Car Dashboard: Digital dashboard for smart-cars.
    43. Zig Zag Pneumatic Lift: Hydraulics and pneumatic lifts.
    44. Wire Rope Elevator: Design and study.
    45. Home Power Generation Using Combination of Solar Panel & Wind Mill: Green energy combo pack.
    46. Home Appliance Turbine: Simple, DIY turbine.
    47. Steam Power Plant: Backyard power generator.
    48. Sheet Metal Cutting Machine: Simple robot to cut metal sheets.
    49. Hydraulic Disc Brake: Study & analysis.
    50. Fabrication of Coconut Tree Sprayer: Used in South Indian continent.
    51. Engine Over Heat Alarm: Notify the driver in case of overheating.
    52. Emergency Braking System: Auto-sense obstacle and apply brakes.
    53. Electric Power from Speed Breaker: When the cars move over speed breakers, generate power.
    54. Electric Power from Industrial Waste Water: Study and analysis.
    55. Pneumatic Forging Machine: Forging of steel bars.
    56. Frictionless Electromagnetic Braking System: Eliminating friction at the contact points.
    57. Conveyer for Quality Contro: Conveyer belts design.
    58. Compressed Air Production Using Vehicle Suspension: Use natural pressure to create compressed air force.
    59. Automatic Spiral Punching Machine: Industrial machine.
    60. Automatic Solar Water Heating System: Installation on rooftops.
    61. CNC Bar Feeding Machine: Study and analysis.
    62. Circular Cutting Machine: Aircraft production industry.
    63. Emission Controller in Automobiles Using Black Box: Simple processor for blackbox in automobiles.
    64. Automatic Rain Operated Wiper: Operates after sensing rain drops.
    65. Automatic Tyre Pressure Inflation System: Sense the tyre pressure using smart-sensors.
    66. Automatic Thermocole Cutter: Precision cutter.
    67. Multi Channel Product Measurement and Rejection System: Calibration of product parameters.
    68. Automatic Intelligent Hydro Irrigation System: Power efficient system.
    69. Precision Gear-Cut Setting Attachment through Shaping Machine: study.
    70. Pneumatic Pick & Placement Robot: Understand & calibrate robotic systems.
    71. Hydraulic Jack: For cars and light vehicles.
    72. Hand Operated Pneumatic Robot: Mechanical advantage.
    73. Fuzzy Logic Vehicle Parking System: Already discussed.
    74. Automatic Lubrication Unit: Lubrication at the joints and surfaces.
    75. Digital Drips Monitor & Alarm: Drip monitoring system, detailed study.
    76. Air Pollution Monitor: Monitor air parameters and determine pollution levels.
    77. Automatic Poor Quality Rejecter: Auto-QA system.
    78. Mileage Projector: Statistical machine to project vehicle mileage.
    79. Paint Mixer Machine: Mixing paints in proper proportions.
    80. Yarn Breakage Monitor: Determine the points of breaks and report them.
    81. Automatic Packaging Systems: Auto-pack the product with robot.
    82. Bombon Bridge: Study, analysis and design.
    83. Automatic Gear Display: Gear display system.
    84. Automatic Gear Changer: Auto-transmission system for 4-wheelers.
    85. Fabrication of Hydraulic Power Plant: Analysis and implementation.
    86. Fabrication of Wind Mill: Power efficient green source of energy.
    87. Automatic Dimensioning Machine: Study.
    88. Automatic Brake Failure Indicator: Constantly monitor the brakes system.
    89. Auto Side Stand Indicator And Center Stand: To be implemented in scooters.
    90. Auto Stop Motion for Spinning Mills: Control and sensing.
    91. Film Roll Cutter: Cut film role at determined positions.
    92. Coffee Maker: Mechanical coffe and milk mixer.
    93. Automatic Bottle Filling System: Specific amount of substance to be filled in the bottles.
    94. Automatic Coil Winding Machine: Create coil windings of specific size.
    95. Automatic PVC Pipe Cutting Machine: PVC pipe precision cutting tool.
    96. Automatic Laminating System: Create plastic laminations.
    97. Low Cost Anti-Lock Braking: Cost effective mechanical system.
    98. Unified Wheel Opener: Car wheel screws and bolts opener.
    99. Power Transmission in Automobiles: Detailed analys of various power transmission states.
    100. Automatic Reverse Braking System: In-dept study and analysis.
    101. Automatic Design Of Wiring Pattern: Calculation of writing pattern and reproduction.
    102. Wall Following Robot: Robot follows walls as guiding points.
    103. Mechanical Four Wheels Steering: Automatic steering of four wheels.
    104. Buoyancy Shoe: Implementation, design and analysis.
    105. Radial Piston Engine: Uses of it in practical locomotives.
    106. Green Nanotechnology In Automobiles: Possibilities of nanotech in automobiles.
    107. Stair Climbing Robot: Mechanical robot that climbs stairs.
    108. Vacuum Braking System: Industrial applications and uses.
    109. Traction Control System: Railway system monitoring.
    110. Magneto Abrasive Flow Machining: Tools and techniques used.
    111. Rollator’s Parking Brake System: Detailed implementation study.
    112. Robotic Manipulator Arm: Uses in the paint industry.
    113. Analysis of a Vise-Grip
    114. Self Excited Vibratory Drilling: Drilling machine design improvements.
    115. Intelligent Reverse Braking System
    116. Rotary Drum Vacuum Filter:
    117. Dynamic Speed Governor
    #3 kamaljeet, Sep 24, 2008
    Last edited by a moderator: Dec 4, 2015
  4. prasobh

    prasobh Newbie

    i dont know wat to do for my mainproject
  5. yatin

    yatin Newbie

    Engineering Discipline:
    I need ides about the mechanical mini projects .
  6. kirankumar08

    kirankumar08 Newbie

    hi i want to work on air fueled engine can someone suggest me some ideas or the web site where i can get full detailed information....
  7. Jetkmr

    Jetkmr Newbie

    See some other topics
    inventory controller

    i would like do my project on piston design in order to overcome the piston slap effect , could you tell some ideas for it.

    do a robotic arm or cnc programming for cutting an edge
  8. ragu.9

    ragu.9 Newbie

    need some ideas for mini project.can u help me
  9. Kaustubh Katdare


    Engineering Discipline:
    We help only those who search before they post.
  10. adith menon

    adith menon Newbie

    I need ides about the mechanical mini projects .
  11. savitha_chandu

    savitha_chandu Apprentice

    Engineering Discipline:
    you can get seminar topics on the website <removed> and also on <Removed>
  12. Aashish Joshi

    Aashish Joshi Maniac

    Engineering Discipline:
    For those of you seeking mini project/seminar topics I suggest you identify your strong areas and then select a topic from that subject/topic. Then if you have any doubts post them here
  13. Kaustubh Katdare


    Engineering Discipline:
    :) I hope engineering students take your advise seriously. Most of the students visit us looking for free lunch [free ideas, free presentations, free code] :(
    • Like Like x 1
  14. mechar

    mechar Apprentice

    ;)hello engineer,:):):):)

    if u want a topic for the miniproject u dont just post this thread and dont wait for long days

    if u search this site(ce) u will get many ideas;-)
  15. plzz give me some miniproject topics in mechanical engineering urgently
  16. karthik042

    karthik042 Newbie

    hi friends,
    i need some project ides 4 my final yr project. snd me tat pls
  17. hemantkshetty

    hemantkshetty Newbie

    I want to build a project on Robotic Arm.....can u pls suggest some sites or some books from where i can get good knowledge about the subject so as to build a project on it....
  18. sarathy

    sarathy Newbie

    i am doing my third year mechanical engineering.
    kindly list out some topics for my mini project this year.
  19. gabbarize221

    gabbarize221 Newbie

    i am final year student of mechanical suggest me project related to fabrication as soon as possible
  20. please respond to me

Share This Page