Tkelly

Tkelly

Member

Member since
Mar 8, 2009
Last active
Apr 16, 2010
Total activities
0

Activity feed

Recent contributions

  1. #Threads

    fa4412d1-5550-4199-89f2-44eeb6ac0d62

    First thing is whether you need O ring for static or dynamic application. Then only you can select O ring. Cross section...

  2. #Threads

    015775f6-4846-422b-a613-0e3f06bc0a68

    Ideally, Motor alongwith pinion should be fixed & steady and rack should move up & down. Best solution can be given if...

  3. #Threads

    d8838434-4eff-4003-8cfe-1d3c3a5fe67a

    Hi, First thing is after how long you are over hauling/servicing plate HE. If it is quite long time then there is...

  4. #Threads

    707c84b3-64d9-49a0-8989-186b180ed5bb

    Re: Design help wanted... I do not understand how electro magnet will work here. Please explain. Tom <a href="https://www.indovance.com" target="_blank" rel=...

  5. #Threads

    70cf01a3-700d-410e-8611-39340c59ff98

    You have mentioned,conveyor will be used for book ransportation. But please mention:- * What is the length ? * Whether it is...

  6. #Threads

    9506b34d-905b-46be-8c8f-c61cab82559d

    For the convergent-divergent nozzle the calculation from the inlet to the throat (convergent) is usually an expansion to sonic conditions. From convergent...

  7. #Threads

    1477171e-65c6-4595-9c09-a3957e5d6d0d

    Are you looking for a company who makes hydraulic power pack or looking for a candidate ? Please elaborate giving your area...

  8. #Threads

    e2ad5481-bc44-477f-9fcb-6e379aeb79f7

    Good innovation. This will save lot of money. According to me hardness of the tyres will be different for different types of...

  9. #Threads

    12468406-b560-4236-9e35-221271bc3c8a

    Re: Design help wanted... Arrangement in model diagram looks ok but confirm the following. 1) Middle rod on which load slides will...

  10. #Threads

    96eec751-1ab1-4cd2-878f-cfa601eb4f63

    First elaborate on this fabrication project. Should it involve sheet metal, bending, shearing, welding? If it is the case, then take project...

  11. #Threads

    d8ca3ff4-52c5-4744-a461-7a0fa0d01049

    Zorif is right. I also suggested same thing. From the load you can decide module od DP ( in inches). Once you...

  12. #Threads

    f567bdfc-de17-440d-87ee-d11089b441bc

    First question, how you decided the motor power without any calculations? I suggest you to speak to speed reducer manufacturer(worm gear box...

  13. #Threads

    5df8ecd2-0bc3-41c8-8cfd-721f46e89f38

    There is formula for calculating the pitch, but it also requires the technical data as written earlier. Tom <a href="https://www.indovance.com" target="_blank...

  14. #Threads

    80b10737-dd41-44fd-97eb-9277e7cba88d

    Mass moment of inertia = M x (K)2 x C M = Mass K = Radius of gyration C = constant Tom...

  15. #Threads

    beee5c90-7590-493b-bc5c-340f67c32a09

    There are different types of Alluminum alloys depending upon application. You can also get the data at #-Link-Snipped-# Tom <a href="https://www.indovance.com...

  16. #Threads

    ed52d3f5-6b43-440a-8327-129135506187

    Without knowing the load to be moved, you can not decide the pitch of Rack & Pinion. Also mention the distance of...

  17. #Threads

    8978952b-8c8a-4c2f-9b8b-61998954aafe

    Assume this shaft is rotating along with the given load. In that case above formulae is correct. But for calculating angular velocity,you...

  18. #Threads

    930966ac-53ca-42f9-930a-f8049cff47a4

    There is no any software for designing. Softwares are only for modelling. For modelling one can use Solidworks, ProE, Catia, etc. Tom...