satanas
@satanas-wIiiPN Member
- Member since
- Joined
- Last active
- Active
- Member number
- Member #25,064
- Posts
- 15
- Replies
- 23
- Reactions
- 0
- Active days
- 0
Contributions
Last 12 months
0 contributions
- Active days
- 0
- Longest run
- 0 days
- Current run
- 0 days
Trophies
Featured trophies
0 / 8
Swipe or scroll to see more trophies
Recent contributions
-
Replied #Threads
ADC LV-maxsonar Ez1 range finder o/p voltage
hi stephen, the scaling factor of Vcc/512 is an "in-built" one.. it's not me who decide on the factor.. so u see the problem.. the idea...
-
Replied #Threads
motor coupling to rack & pinion
hi Robinson, finally i did use a gearmotor!! anyway, do u guys have an idea what motor i could use to pump paint??
-
Posted #Threads
ADC LV-maxsonar Ez1 range finder o/p voltage
hi friends, please have a look at the following specs and help me out! specs: The LV-MaxSonar detects objects from 0-inches to 254-inches (6.45-meters) and provides...
3 replies -
Posted #Threads
adc conversion using PIC 16f877a
hi, can we assign any conversion channel to perform a conversion.. example: i have 2 ultrasonics range sensors and i am measuring the distance to a...
-
Posted #Threads
ADC conversion using PIC 16f877a
hi, can we assign any conversion channel to perform a conversion? example: i have 2 ultrasonic range sensors and i am measuring the distance to a...
2 replies -
Replied #Threads
pipe diameter and pump gpm
hi.. paint will not be in a pressurised container.. i am simply pumping and transferring paint thru a delivery tube up to a head of max...
-
Posted #Threads
pipe diameter and pump gpm
hi everyone, i am using a pump to transfer paint and my pump rating is found to be 0.165 gpm. but i am wondering if the...
4 replies -
Posted #Threads
lift mechanism
Hi guys, i have a platform a distance above another one.. the upper platform is on wheels which are in contact with ground and i supporting...
2 replies -
Replied #Threads
How would you modify a bicycle to make it more efficient?
hmmm.. you want to the magnet to rotate the wheels?.
-
Replied #Threads
How would you modify a bicycle to make it more efficient?
Hi, does this include bike also?? bike and bicycle are not similar.. well, we did a project on increasing safety in kids bicycles. its an automatic...
-
Posted #Threads
New wall follower C programming
Dear all, i have this situation: i need my robot to move a distance X cm along a straight wall of length Y m (the length...
1 reply -
Replied #Threads
input from keypad and microcontroller
Hi, i tried it but things are not working.. can you provide me with the circuit please-resistors values? the supply is 5V and am sure i...
-
Replied #Threads
C Programming- wall follower
C programming-wall follower robot Dear all, i have this situation: i need my robot to move a distance X cm along a straight wall of length...
-
Posted #Threads
C Programming- wall follower
Dear all, i have this situation: i need my robot to move a distance X cm along a straight wall of length Y m (the length...
1 reply -
Replied #Threads
How would you modify a bicycle to make it more efficient?
please, first specify what do we want to achieve here?? speed or comfort or both? and is it for sports bicycles-competition- or those you use to...
-
Replied #Threads
input from keypad and microcontroller
Hi Karthik, thanks for the tip.. i will try it right away.. cheerz. regards. satanas
-
Replied #Threads
how to create a world free from co2 emission?
i say first combat corruption.. those money can be invested in research and renewable energy!! its everybody's right to live in a better world.. so make...
-
Replied #Threads
How would you modify a bicycle to make it more efficient?
Hi all, Bicycles should be manually, including motors is a bad idea..else we would call it a motorbike.. am happy with my bicycle,just that it's a...
-
Posted #Threads
input from keypad and microcontroller
Hi all,😁 can you guys help me with: how to input a value from a keypad (say a keypad having 4 numbers; 1,2,3 and 4) into...
6 replies -
Replied #Threads
motor coupling to rack & pinion
hi pals, i did zoom into the spring loaded braking sys but did not find anything that considers solenoids or electromagnets.. instead am getting info on...
-
Replied #Threads
motor coupling to rack & pinion
hi all.. thx Rohan_sK, 2010mayan and Tkelly for your replies.. sorry i have been away for a long time.. i am curious about this spring loaded...
-
Replied #Threads
help: steering and wheel configuration
hi..Rohan_sK.. thx for the tips buddy.. i will surely post my project soon.. cheerz n thx 4 ur good wishes..
-
Posted #Threads
help: steering and wheel configuration
hi all, i am having problem to decide what type of steering will be best for my painting system.. i have a painting arm which is...
2 replies -
Replied #Threads
HELP: what type of pump is best for water-based paint?
thx rohan for your insight!! now i can try to select my pump.. however, if you have more info on how much paint we use when...
-
Posted #Threads
motor coupling to rack & pinion
hi all, a rack & pinion system in which the pinion, coupled with a motor, is made to move along the rack ( in the vertical...
9 replies -
Posted #Threads
HELP: what type of pump is best for water-based paint?
hi all, i would like to know what type of pump i may use to supply paint (water-based) onto a roller; it is like an overhead...
2 replies -
Replied #Threads
force sensor
thank you Ohm for your suggestion, but i have no means of measuring it. if you guys have those spring scales, can you send me a...
-
Posted #Threads
force sensor
hi guys, i need to know the average force applied on a wall while painting using a roller. for this i need to conduct a test...
5 replies -
Replied #Threads
rack and pinion calculations
hi, i would like some information about " how to mount a rack and pinion in the vertical plane".. the pinion will be moving the rack,...
-
Replied #Threads
Design and implementation of a wall painting machine using rollers
hi gohm, i have considered spray guns but am using normal water-based paint.. can it work?
-
Replied #Threads
Design and implementation of a wall painting machine using rollers
hi 4d1, won't the length of strokes be dependent on cam diameter? if it can paint a wall of 3m-approximately 1.9m without extension, plz give me...
-
Replied #Threads
Design and implementation of a wall painting machine using rollers
linear actuators?? how?? i would like some more information about it.. well, linear actuators in the vertical plane. wat will happen if power goes off?? also,...
-
Posted #Threads
Design and implementation of a wall painting machine using rollers
Hi. i have always seen painting systems using sprayers to paint cars, objects and buildings, etc. so i am wondering if implementation of an automatic wall...
7 replies -
Posted #Threads
Scada, telesurveillance & telemetry
any 1 has notes on these things??? 😕 HAPPY NEW YEAR 09 TO ALL CRAZY ENGINEERS..😁
2 replies -
Replied #Threads
electromagnetic towing of vehicles
any 1 has notes on SCADA, TELESURVEILLANCE, TELEMETRY????
-
Replied #Threads
electromagnetic towing of vehicles
well, cables r not the real prob here!! the thing is that u wont b dependent on that sole scrap machine to come and pull u!!...
-
Replied #Threads
running air cooler with solar energy
its a very interesting project...can also try blower fan ( in cars) powered by solar...
-
Posted #Threads
electromagnetic towing of vehicles
😉well guys, i've always seen the somewat dull way of pulling "breakdown" vehicles with huge cables..😕so i thought of this sys for toys like cars to...
5 replies
Activity by month
Where satanas contributes
-
#Threads 38 · 100%
Highlights
- Reactions per contribution
- 0.0
- Best answers
- 0
- Member for
- 17 years