Jeanius

I'm trying to model the pressures and motions in this system I'm working with. Imagine two cylindrical pistons connected to each other with some tube that allows fluid flow. Now...

I'm trying to quantify the amount of hydrogen that will be in a volume of water after bubbling 10% H2/90% N2 through it. The amount in the water should equilibrate...

I, for one, am an atheist, and therefore don't have much of an opinion. But if there is a god, and he has the power to do "anything," I'm sure...

I've actually heard of this idea (and heard of it being implemented), but I'm rather skeptical as to whether or not the energy that's produced is worth the cost of...

Not a repost, more of an FYI. Since my project spans both electronics and chemistry I thought I'd give you chemmies a heads up to look in the electronics forum...

Does anyone here have any experience building circuitry for electrochemical cells? I've got a rather expansive problem with my circuit, or more appropriately, a series of IC's I've been using....

I've found that the problem with my circuit (see ADG436 thread) was a capacitor that discharges very slowly. Could this problem just be a faulty cap?

I just got some advice saying that replacing the 1N914 diode specified in the wiring diagram on page 5 of the data sheet with a 1N4148 would provide some improvements,...

Unfortunately, I'm bound to +/- 5V due to the device I'm using (NI DAQ USB-6008), but I think I found out what was causing the problem. I'm using a DC-DC...

I looked through the datasheet, and couldn't find anything I'd violated. I'm not an electrical engineer, so I could be overlooking something, but have troubleshooted the circuit so many times...