CrazyEngineers
CrazyEngineers
TinaT

TinaT

TinaT is an esteemed member of CrazyEngineers since Feb 24, 2011

Posts contributed
15
Birthday
N/A
Sep 6, 2011
There is a trade off in the auxiliary power required to pulverize the coal. Coal which is crushed finer will, in most cases, burn better (depending on the boiler design)...
Sep 6, 2011
Re: Preparations Please use full sentences and complete words.
Sep 6, 2011
Draw a flow chart and all will become clear.
Sep 2, 2011
Double check your business plan, put enough money in savings to support yourself for 6 months beyond when you think your biz will be profitable, then JUMP... and a net...
Apr 7, 2011
Most of the modifications will be to the fuel nozzles. You may just need to switch out the diesel nozzles for gas nozzles. Or you could opt for dual-fuel nozzles,...
Feb 26, 2011
Yes, with the right combustion nozzles, biogas should be usable. They've had good luck with the larger GE LM engines with a wide range of fuels.
Feb 26, 2011
There are dual rotor gas turbines used for power generation. The GE aeroderivative units, LM2500, LM6000, etc. are based on airplane engines with the fans replaced with additional turbine stages...
Feb 26, 2011
Do what you love first. The money will follow.
Feb 26, 2011
1 MW? Sounds like a Solar Saturn 20 might be close? #-Link-Snipped-# Kawasakai, Siemens and Mistubishi also have GT's in this load range for natural gas. If you can go...
Feb 26, 2011
The only problem I see with "work for 2 years then decide" - is once you start getting a steady paycheck, you won't want (and some won't be able) to...
Latest activities

    TinaT joined CrazyEngineers on Feb 24, 2011

Home Channels Search Login Register