NANOVEA

Tissue Surface Topography Using 3D Metrology Surface area, texture and topography are all crucial measurements required when studying the interaction between tissue and biomaterial surfaces. During the Microfabrication of biomaterials...

[h=3]The intention of shot peening is ultimately to alter the mechanical properties of a given surface. By hitting the surface with controlled shot the surface will deform plastically. Two of...

Wear and friction should be evaluated along with surface roughness of the part/material in question. This will allow to understand the best choice of material and or surface finish: #-Link-Snipped-#

Shot peening is a process by which a substrate is impacted with round metal, glass or ceramic beads, also known as shot, at a force intended to create plasticity on...

@Issue: It is assumed that in this forum questions are asked from an R&D or production environment. The question was vague. To answer your question, No. This is not something...

What needs to be ensured? We see roughness, friction, wear and scratch resistant often. #-Link-Snipped-#

This might help, to study you will need precise slow speed. Stribeck Curve Analysis Using Tribometer When lubrication is applied to reduce the wear/friction of moving surfaces an increasing load...

Great question, and we are glad for the opportunity to respond. The short answer, NDA Non Disclosure Agreement. Any significant commercial account that an advancing technology may acquire will always...

Re: Project I would suggest using your mass transfer choice to study the improvement of a material application. Chemical engineers and Materials engineers have such a vast ability to partner...

While R&D topics continue to lead as a beacon for economic recovery, a crucial part of the R&D process continues to receive little to no attention. And make no mistake,...