manoj_2all

Current Transformers – Burden and Classification. Current Transformers occupy a vital part in the measurement and protection scheme of any electric installation. ​Hence, it is imperative that the choice of...

Yes both Alternator and Generator have same principle of generating power but only in generator we convert the AC voltage supply to DC voltage by using Commutator......

I have connected all of them to one neutral bus and connected that bus to ground via NGR (Neutral Grounding Resistor) it has no problem till date

dileep kGenerally,in brief my lecturer told that SCADA is computer based process of supervisory control and data acquisition and when the fault is generated a frequency will be generated at...

As there is no Back EMF existing on the motor side due to this the motor consumes high starting current as it connected directly to the power supply. To reduce...

Yes you are right, may be there is fault in the motor side not with the source side......

Neutral is the point at which all the three phase’s current meets and the algebraic sum of current becomes zero in case of “Balanced Load Condition”. I = I1 +...

The burden of a current transformer is indicated in its nameplate. The burden is rated in VA. such as 15 VA or 25 VA. The rated VA indicates the load...

Check for Slip Ring Motors; Demag: #-Link-Snipped-#

Yes it works like a Switch; ON (Active) and OFF (De-active) state but the equipments in remote places.