Dan68

Not sure what you want to know but, if you are concerned about it want have enough strength. Calculate the loads through the shaft under braking and the amount of...

Do you just want to change the sound of it.

You really have to look back at the main principles. If you drive the car and charge the battery from a generator directly of the motor you will have an...

well where you need to start is your parameters. where does the input output need to be. What forces are there involved to get an idea of the shaft size....

Its all about preference. I prefer solidworks since thats what i learned. Iv had a play with pro e and inventor and id rather solidworks. solidworks screens i find more...

Re: Help needed with contraptions Potential to kinetic kenetic to heat

you are going to have to look at what size rotors and calipers you have on the vehicle. the location of your centre of gravity and obviously the weight on...

For design i have used solidworks i find it easy to learn and user friendly and as a uni student we got sponsorship copies for a FSAE team. Automobile books...

Hi. From what you want to use i take it this is an assignment you have. Basically you have to determine where the shafts need to be, ie input and...