Chandrakiran

2 phase supply have very little applications in transformers (scott connection) and used in 2 phase Induction Motors ( used in servomechanisms ranges from watts to few hundreds of watts)...

Its true, matlab is like a big ocean, you cannot swim it, please mention the topic required. However, for studying basics small books about the fundamentals is better option, and...

Seminar Topics: 1. SCADA and power system automation (substation automation) 2. Advancements in Renewable resources (lot of research carrying on solar and wind power to supply power to even remote...

As a design engineer for N plant ( just the beginner of course) i can try to explain it: 1.In nuclear industry safety is primary concern rather than producing electricity....

Electricity Board supplies electricity, here as 220V and 11kV. The later is again decreased to 220V and then used. My question is what is the need for 11kV supply. I...

I hope you are using MATLAB/SIMULINK for design. Every engineering problem can be converted in to set of mathematical equations.Mathematical modelling is to build up the machine by mathematical equations....

Power and Voltage are inter related, I will ask a question, consider i have to deliver 500MW power through transmission lines and i have option to choose 400kV and 220kV...

Rating of electrical equipment: Power rating: Power rating of the electrical equipment (say) transformer, circuit breaker depends on the power it is handled during normal operation of the equipment. It...

Power can be transmitted at any voltage we designed, consider 400kV EHV and 750kV EHV lines where the multiple of 1.1 has not come. Form factor is one consideration for...

If i understand correctly supplying power from both the directions in a transmission system will be like Ring main supply in the grid. Where power is fed from both directions...