CrazyEngineers
CrazyEngineers
The myth buster

The myth buster

The myth buster is an esteemed member of CrazyEngineers since Jun 25, 2012

Posts contributed
37
Birthday
N/A
Apr 25, 2013
of course flywheels are used in majorly every engine..they act as reservoirs of enery and store or provide energy according to the situation..example during power stroke, it stores energy which...
Apr 25, 2013
for heat and mass transfer go for j p hollman and younus a cengel..both are equally good..for automobile u can also refer heitner apart from the ones already mentioned by...
Oct 22, 2012
I agree with your first thought....!!
Oct 22, 2012
How can this be possible..so are saying that with the increase in temperature, ds becomes negative..but this isn't possible..as for any process to occur, ds shoulb be greater than or...
Oct 22, 2012
anjali zendreyes..i was want to know about pressure condition....so water will boil in 100'c when atmospheric pressure is there...if pressure will change...boiling point of water will also Chang... means high...
Oct 22, 2012
yes..exactly..!!
Oct 21, 2012
a nozzle is a device used to convert pressure energy into kinetic energy.Nozzles may not be converging in section always..the property of flow decides the design of the nozzle.for flows...
Oct 21, 2012
can somebody please give an elaborate description about the various parts and working of a hermetically sealed compressor used in our domestic refrigerators..??
Oct 21, 2012
well isothermal heat addition and rejection is quite difficult to attain.isothermal heat addition requires the process to occur very quickly whereas isothermal heat rejection requires the process to be very...
Oct 21, 2012
The boiling point of water 1s 100 degree celsius only at 1 bar or 101.325 kPa pressure..if the pressure conditons change, the corresponding sturation temperature shall be the boling point...
Latest activities

    The myth buster joined CrazyEngineers on Jun 25, 2012

Home Channels Search Login Register