rajcivil2k6
@rajcivil2k6-ScQrQV Member
- Member since
- Joined
- Last active
- Active
- Member number
- Member #87,570
- Posts
- 5
- Replies
- 34
- Reactions
- 0
- Active days
- 0
Contributions
Last 12 months
0 contributions
- Active days
- 0
- Longest run
- 0 days
- Current run
- 0 days
Trophies
Featured trophies
0 / 8
Swipe or scroll to see more trophies
-
Replied #Threads
concrete bridge without reinforcement
Interesting topic. Bridge without steel, for that case any structure without steel would become huge in size and brittle. So, steel has to be substituted with...
-
Replied #Threads
Civil Engineers Scope
CIVILPRINCESSi'm sorry i mean quality control and quality assurance.Yes, very much
-
Replied #Threads
Civil Engineers Scope
CIVILPRINCESSwe also take part in the quality survey right:?: can it be added ? 😀can you pls brief, so that i can be sure
-
Replied #Threads
Welcome To Civil & Structural Engineering Forum!
That's good, but still i feel it should have been only "CIVIL ENGINEERING" because structure is part of Civil. Just a thought
-
Replied #Threads
Does Google Earth Software Help Civil Engineers?
That's a interesting question and thanks for the question I use Google earth for my work, at times we will not have key plan's for many...
-
Replied #Threads
Toughest Civil Engineering Subject!
I don't think there is something tough in "curriculum", but there are topics totally "DRY" like Environmental, Hydrology, Irrigation, Soil mechanics etc..
-
Replied #Threads
Pre - Stressed Concrete
I recommend "DESIGN OF PRESTRESSED CONCRETE" by R.I. GILBERT & N.C MICKLEBOROUGH ISBN 0-203-98586-9 e-book ISBN 0-419-16160-0 (Print Edition)
-
Replied #Threads
Basics of Civil Engineering.
Shuttering or form work, is the term used for temporary timber, plywood, metal or other material used to provide support to wet concrete mix till it...
-
Replied #Threads
Pre - Stressed Concrete
Application: Beam(cast-in-situ & precast), Deck/Roof Slab, Girders, segmental construction etc.
-
Replied #Threads
Pre - Stressed Concrete
Advantage: Reduction of crack or no crack. Slender section of members. Increased load carrying capacity. Maximum usage of material properties.
-
Replied #Threads
Pre - Stressed Concrete
Post-tensioned concrete With the formwork in position, the concrete is cast around hollow ducts which are fixed to any desired profile. The steel tendons are usually...
-
Replied #Threads
Pre - Stressed Concrete
Pretensioned concrete The prestressing tendons are initially tensioned between fixed abutments and anchored. With the formwork in place, the concrete is cast around the highly str...
-
Replied #Threads
Pre - Stressed Concrete
Prestressing: Prestress is usually imparted to a concrete member by highly tensioned steel reinforcement (tendons, wire, strand, or bar) reacting on the concrete. The high stren...
-
Replied #Threads
Pre - Stressed Concrete
[FONT="]Prestressed concrete is a particular form of reinforced concrete. Prestressing involves the application of an initial compressive load on a structure to reduce or elimi...
-
-
Replied #Threads
Basics of Civil Engineering.
Curing , is very important point in concrete works, if proper curing is not done the result would be crack formation & reduction in strength. Why...
-
Replied #Threads
Basics of Civil Engineering.
Mortar, i have seen people getting doubt while calculating cement, fine aggregate & course aggregate for mortar mixes For example am going to consider 1:4 mortar,...
-
Replied #Threads
Planning......a topic unscratched, i hope
ishutopreSo I think PERT is better isn't it?I think PERT was most probabily invented by US army.Correct me please. I think the below link can give...
-
Replied #Threads
Planning......a topic unscratched, i hope
Good try Maria , We cant say it same..... 1. CPM is activity oriented i.e. CPM network is built on the basis of activities. Also result...
-
Replied #Threads
Basics of Civil Engineering.
Aggregates, used for concrete production should be less pores, in other words it should not absorb water more than recommendations by Code's, usage of such aggregates...
-
Replied #Threads
Basics of Civil Engineering.
Height of drop of concrete, is also an important aspect to be considered because if the drop height is more than 1 meter segregation would happen...
-
Replied #Threads
Basics of Civil Engineering.
Cover thickness/Clear Cover, is the distance between concrete surface and the reinforcement nearest to this surface. It is provided by using spacers made of concrete or...
-
Replied #Threads
Route Survey
The below link can be of use, HIGHWAY ENGINEERING FIELD FORMULAS <a href="https://www.wsdot.wa.gov/publications/manuals/fulltext/M22-24/FieldFormulas.pdf" target="_blank" rel="nof...
-
Replied #Threads
Basics of Civil Engineering.
martincrowHow i can find a perfect layout for my house? I am just started construction of my house, and i want to build it in such...
Activity by month
Where rajcivil2k6 contributes
-
#Threads 39 · 100%
Highlights
- Reactions per contribution
- 0.0
- Best answers
- 0
- Member for
- 15 years