el3ktr1k
@el3ktr1k-Tt5S33 Member
- Member since
- Joined
- Last active
- Active
- Member number
- Member #12,613
- Posts
- 12
- Replies
- 13
- Reactions
- 0
- Active days
- 0
Contributions
Last 12 months
0 contributions
- Active days
- 0
- Longest run
- 0 days
- Current run
- 0 days
Trophies
Featured trophies
0 / 8
Swipe or scroll to see more trophies
-
Replied #Threads
James Bond BMW remote Control Car
Some people have done a similar thing on a smaller scale with an iphone and RC car.
-
Replied #Threads
Getting Sonar sensor to work under water
Ok thanks. I think I'll have the casing made as thin as possible and see if that works.
-
Replied #Threads
PWM frequency
thanks. I'll look for a motor with low inductance since lowering the PWM frequency isn't really an option.
-
Replied #Threads
LAN Communication
I know how to connect to the internet. I want to be able to send raw data from one computer to another over Wi-Fi.
-
Replied #Threads
Multiplying in a microcontroller
Yes I was doing this in assembly. I got the microcontroller to control motors without any feedback but now that I need to implement a PI...
-
Replied #Threads
Reading in Data using a microcontroller
I'm still having trouble getting the PIC to work after following your diagram. I connected pins 11 and 32 to +5V like it shows. I also...
-
Replied #Threads
Reading in Data using a microcontroller
I think I figured out what I was doing wrong. I noticed on the programmer board there was a jumper wire that was using the RC...
-
Replied #Threads
Reading in Data using a microcontroller
I think I may have the the wrong configuration for the type of oscillator that I'm using. This what I have in the beginning of my...
-
Replied #Threads
Reading in Data using a microcontroller
I am using Matlab to send to the data the serial port and I have loaded the loaded the code to the microcontroller.
-
Replied #Threads
Reading in Data using a microcontroller
There must still be something I'm doing wrong since I still can't figure out to get the microcontroller to communicate with my PC. Is there maybe...
-
Replied #Threads
Encoder data: How to interpret encoder data from a motor going into the PIC16F877?
Re: Encoder data: How to interpret encoder data from a motor going into the PIC16F877 Is the encoder continuously sending data and I just have to...
-
Replied #Threads
Reading in Data using a microcontroller
Thank you Ash. I plan on using the PIC16F877 by Microchip. I looked at the data sheet and found the information about the Tx and Rx...
-
Replied #Threads
Reading in Data using a microcontroller
I still don't understand how the PIC is able to capture serial data and store it somewhere in memory. For example if I'm sending the binary...
Activity by month
Where el3ktr1k contributes
-
#Threads 25 · 100%
Highlights
- Reactions per contribution
- 0.0
- Best answers
- 0
- Member for
- 18 years