el3ktr1k
@el3ktr1k-Tt5S33 Member
- Member since
- Joined
- Last active
- Active
- Member number
- Member #12,613
- Posts
- 12
- Replies
- 13
- Reactions
- 0
- Active days
- 0
Contributions
Last 12 months
0 contributions
- Active days
- 0
- Longest run
- 0 days
- Current run
- 0 days
Trophies
Featured trophies
0 / 8
Swipe or scroll to see more trophies
-
Replied #Threads
James Bond BMW remote Control Car
Some people have done a similar thing on a smaller scale with an iphone and RC car.
-
Replied #Threads
Getting Sonar sensor to work under water
Ok thanks. I think I'll have the casing made as thin as possible and see if that works.
-
Replied #Threads
PWM frequency
thanks. I'll look for a motor with low inductance since lowering the PWM frequency isn't really an option.
-
Replied #Threads
LAN Communication
I know how to connect to the internet. I want to be able to send raw data from one computer to another over Wi-Fi.
-
Replied #Threads
Multiplying in a microcontroller
Yes I was doing this in assembly. I got the microcontroller to control motors without any feedback but now that I need to implement a PI...
-
Replied #Threads
Reading in Data using a microcontroller
I'm still having trouble getting the PIC to work after following your diagram. I connected pins 11 and 32 to +5V like it shows. I also...
-
Replied #Threads
Reading in Data using a microcontroller
I think I figured out what I was doing wrong. I noticed on the programmer board there was a jumper wire that was using the RC...
-
Replied #Threads
Reading in Data using a microcontroller
I think I may have the the wrong configuration for the type of oscillator that I'm using. This what I have in the beginning of my...
-
Replied #Threads
Reading in Data using a microcontroller
I am using Matlab to send to the data the serial port and I have loaded the loaded the code to the microcontroller.
-
Replied #Threads
Reading in Data using a microcontroller
There must still be something I'm doing wrong since I still can't figure out to get the microcontroller to communicate with my PC. Is there maybe...
-
Replied #Threads
Encoder data: How to interpret encoder data from a motor going into the PIC16F877?
Re: Encoder data: How to interpret encoder data from a motor going into the PIC16F877 Is the encoder continuously sending data and I just have to...
-
Replied #Threads
Reading in Data using a microcontroller
Thank you Ash. I plan on using the PIC16F877 by Microchip. I looked at the data sheet and found the information about the Tx and Rx...
Activity by month
Where el3ktr1k contributes
-
#Threads 25 · 100%
Highlights
- Reactions per contribution
- 0.0
- Best answers
- 0
- Member for
- 18 years