ACCIDENT ALERT IN MIST AREAS
Project Abstract / Summary : In Mist areas, the driver in vehicles can not see the vehicles at front. This project is developed for vehicles accident alert in mist areas. The main modules in this project are Infrared transmitter, Infrared receiver, Microcontroller unit and audio section.
An Infrared signal is produced by using the electronic circuit. The Infrared produced is transmitted along a particular direction. The Infrared signal travels and falls on the Obstacles and reflected back. This setup is connected at the front of the vehicle.
In the electronic circuit, there is a Infrared receiver. The reflected Infrared signal can be received through the receiver if there is any obstacles.
The microcontroller counts the time taken between the transmission and the receiption and thus calculates the distance. If there is obstacles in front of the vehicle, it produces a warning signal. Thus the driver can easily stop the vehicle. This project is very useful for vehicles in mist areas
Why did you choose to work on this project topic : To Reduce the accident in mist places and we can save the human beings
driver can easily stop the vehicle. This project is very useful for vehicles in mist areas. The purpose of
such a model is to advance a system to detect fatigue
symptoms in drivers and control the speed of vehicle
to avoid accidents. The main components of the
system consist of number of real time sensors like gas,
eye blink, alcohol, fuel, impact sensors and a software
interface with GPS and Google Maps APIs for location
Project Category : Electrical / Electronics / Communication
------------------------------------------------------
Institute/College Name: Sri Manakula Vinayagar Engineering College,Puducherry
City: PONDICHERRY
State: PONDICHERRY
Participating Team From: Third Year
An Infrared signal is produced by using the electronic circuit. The Infrared produced is transmitted along a particular direction. The Infrared signal travels and falls on the Obstacles and reflected back. This setup is connected at the front of the vehicle.
In the electronic circuit, there is a Infrared receiver. The reflected Infrared signal can be received through the receiver if there is any obstacles.
The microcontroller counts the time taken between the transmission and the receiption and thus calculates the distance. If there is obstacles in front of the vehicle, it produces a warning signal. Thus the driver can easily stop the vehicle. This project is very useful for vehicles in mist areas
Why did you choose to work on this project topic : To Reduce the accident in mist places and we can save the human beings
driver can easily stop the vehicle. This project is very useful for vehicles in mist areas. The purpose of
such a model is to advance a system to detect fatigue
symptoms in drivers and control the speed of vehicle
to avoid accidents. The main components of the
system consist of number of real time sensors like gas,
eye blink, alcohol, fuel, impact sensors and a software
interface with GPS and Google Maps APIs for location
Project Category : Electrical / Electronics / Communication
------------------------------------------------------
Institute/College Name: Sri Manakula Vinayagar Engineering College,Puducherry
City: PONDICHERRY
State: PONDICHERRY
Participating Team From: Third Year
Replies
You are reading an archived discussion.
Related Posts
Project Abstract / Summary : The main problem that our environment faces today is pollution,mainly in the industrial areas.our project focuses on this issue... We monitor the important pollutants in...
Project Abstract / Summary : The slitting process of adhesive tape implies slitting (cutting) by the slitting cutter. After a specific interval of time i.e. after being used (for cutting),...
Project Abstract / Summary : In recent years, the home environment has seen a rapid development of home automation and various security measures. This technology offers new and exciting opportunities...
Project Abstract / Summary : In supersonic and hypersonic flows,wave drag,skin friction drag and base drag are the three main components of the total drag force.A new concept termed Breathing...
Project Abstract / Summary : This paper presents with the development of a system for the neutralization and disposal of the Computer To Plate (CTP) printing wastes which at present...