Special Purpose Machine For Grinding Of Sliting Cutter
Project Abstract / Summary : The slitting process of adhesive tape implies slitting (cutting) by the slitting cutter. After a specific interval of time i.e. after being used (for cutting), the cutter loses its sharpness gradually i.e. the lip angle (cutting angle) changes. It is intended to maintain the lip angle again by grinding it.
Moreover, the grinding of slitting cutter is done by very few (3-4) firms in all over Maharashtra. Therefore, it becomes hectic, time consuming and expensive for the company to regrind cutters.
Hence, it was intended to make a special purpose machine for grinding of slitting cutter maintaining its lip angle and our machine was invented with the same motto.
Why did you choose to work on this project topic : To solve an industrial problem.
The grinding of slitting cutter is done by very few (3-4) firms in all over Maharashtra. Therefore, it becomes hectic, time consuming and expensive for the company(manufacturing adhesive tapes in nashik) to regrind cutters.
Hence, it was intended to make a special purpose machine for grinding of slitting cutter maintaining its lip angle and our machine was invented with the same motto.
Project Category : Mechanical / Automobile / Aeronautical
------------------------------------------------------
Institute/College Name: R. H. Sapat College of Engg. Mng. Stdies and Research, Nashik
City: Nashik
State: Maharashtra
Participating Team From: Final Year
Moreover, the grinding of slitting cutter is done by very few (3-4) firms in all over Maharashtra. Therefore, it becomes hectic, time consuming and expensive for the company to regrind cutters.
Hence, it was intended to make a special purpose machine for grinding of slitting cutter maintaining its lip angle and our machine was invented with the same motto.
Why did you choose to work on this project topic : To solve an industrial problem.
The grinding of slitting cutter is done by very few (3-4) firms in all over Maharashtra. Therefore, it becomes hectic, time consuming and expensive for the company(manufacturing adhesive tapes in nashik) to regrind cutters.
Hence, it was intended to make a special purpose machine for grinding of slitting cutter maintaining its lip angle and our machine was invented with the same motto.
Project Category : Mechanical / Automobile / Aeronautical
------------------------------------------------------
Institute/College Name: R. H. Sapat College of Engg. Mng. Stdies and Research, Nashik
City: Nashik
State: Maharashtra
Participating Team From: Final Year
Replies
You are reading an archived discussion.
Related Posts
Project Abstract / Summary : In recent years, the home environment has seen a rapid development of home automation and various security measures. This technology offers new and exciting opportunities...
Project Abstract / Summary : In supersonic and hypersonic flows,wave drag,skin friction drag and base drag are the three main components of the total drag force.A new concept termed Breathing...
Project Abstract / Summary : This paper presents with the development of a system for the neutralization and disposal of the Computer To Plate (CTP) printing wastes which at present...
Project Abstract / Summary : Its a Machine for splitting the wooden logs into two pieces at a time, the logs are required to split so it can be burn...
What is the basic difference between production engineering and manufacturing engineering ?