Gowtham_JGR

Gowtham_JGR

Gowtham_JGR is an esteemed member of CrazyEngineers since Feb 2, 2012

Posts contributed: 7
Birthday: N/A

Not only in VLSI in every field there is necessary to follow simple and efficient design method to get high efficiency

In VLSI technology we need to construct the circuit which is simple, reliable, less complex and very fast. While making Gates using CMOS, NAND gates are easy to make !...

Thanks Narayana Murthy the power of stepper motor is high current, flowing through also high about 1to2 Amps do I need to design another circuit to connect the IC parallel...

Hi Dears, Good Day I have a doubt in basic electrical/electronics engineering. My Question is Does the current depends upon the load resistance ? For example I am going to...

No coaching no one I met but met in Class rooms 😉

Check the connection with Multimeter for continuity and check the resistance across the two wires A+,A- and B+,B-,/.... then connect I have 6.6 ohm for 4.2 kgcm Torque 😀

Latest activities

Gowtham_JGR joined CrazyEngineers on Feb 2, 2012

Home Channels Search Login Register