vish4me

vish4me

Member

Member since
Apr 25, 2009
Last active
Dec 2, 2009
Total activities
0

Activity feed

Recent contributions

  1. #Threads

    8290b358-712e-4db2-ad5c-810efdc0bc92

    hi, i used the formulae torque=I*alpha. the section mounted on shaft should rotate by 180 degrees in 25 minutes. so the speed...

  2. #Threads

    11735645-cd63-4a74-ab05-4fe85e384cf5

    I have a doubt. how do you select the cross-section dia of o-ring. this seems to the starting point in designing the...

  3. #Threads

    o-rng gland design

    Hi, Can anyone help me in understanding design of o-rings. what are the parameters which need to be known for designing the...

  4. #Threads

    mass moment of inertia

    hey.. can we add up the mass moment of inertia's of different bodies rotating about the same axis to get the total...

  5. #Threads

    81ab5556-0d01-4bb6-9c3e-2e2455d8f269

    hi, i am doing a project on frame tilting arrangement where the sheet metal stacks mounted on a shaft have to be...

  6. #Threads

    10a81653-ba13-4f06-83a7-68ea1ab45ad6

    hi, in this case, the shaft c/s is circular. but a rectangular c/s load is mounted on the shaft. how do i...

  7. #Threads

    motor selection

    i have to rotate 15000 kgs using a dc electric motor.the power required is 2.5 hp. since the rotation is slow can...

  8. #Threads

    calculation of torque in a rectangular section

    hi, how do you calculate torque in a rectangular section due to rotation.do we follow the same method as we use for...

  9. #Threads

    232c617e-b490-4a80-81a3-e9a432b14211

    i checked the formulae ...... Mt=95550*1000*N/n where N is power in kW. n=speed of shaft in rpm. the formulae for dia is...

  10. #Threads

    df4c0f8a-c619-4205-953e-05ed984416ff

    Re: electric motor hey thanks a lot guys for the help

  11. #Threads

    9082cadd-8ccb-4770-b377-3f6ff366925b

    the shaft carries about 15000 kgs distributed load. it has to rotate 180 degrees in 25 minutes. it is powered by an...

  12. #Threads

    design of shafts

    hi, i have a problem regarding designing a slow speed shaft.. the speed of the shaft is 0.02rpm😀 using, Torque=(9550*1000*power)/speed i am...

  13. #Threads

    Minimum speed available for an 8 hp dc electric motor with torque of 37 kn-m

    hi i wanted to know the minimum speed available for an 8 hp dc electric motor with torque of 37 kn-m.

  14. #Threads

    calculating torque and power

    HI I HAVE BEEN GIVEN THE FOLLOWING DATA SHAFT DIA:150 mm WEIGHT TO BE TILTED 12000 KGS CALCULATE RPM OF SHAFT AND...