T.Vikram Singh

T.Vikram Singh

T.Vikram Singh is an esteemed member of CrazyEngineers since Oct 12, 2016

Posts contributed: 10
Birthday: N/A

Anoop KumarAnother way, design like this. You can only screw it but when you try to unscrew, screw driver will not able to hold it. <a href="https://www.naturalhandyman.com/iip/inffastener/infoneway.html" target="_blank" rel="nofollow noopener...

the basic Cummins 4 Bt generates 105 Hp @ 2400 RPM so this gets to 230 lb Ft torque, basically what im trying to do is to increase and maintain...

Hi There Ankush, i got the yield strength of En353 from solidworks material database, yes 1500 RPM is enough for 2.5 ton weighing vehicle as Cummins 4BT was also used...

i know Anku2993 that i am not being specific with the all the information that im sharing, please bear with me..//

here's the pic of tire i'm not sure about exact size of the tire but i guess we can approximate the size of the tire from the pic roughly

The RPM of the engine is increased from 1800 to 3000 with the help of extra auxiliaries like custom fuel injection system..etc, while making sure that torque is maintained same,...

rpm 1800 to 3000 rpm was raised by adjusting and introducing some valves in fuel injection system.Torque is still constant

it is off road vehicle, the total weight of the vehicle is 2.5 ton & shaft material is EN353, As you said 1500 RPM will be required when we are...

Anku2993can you also specify the dimensions of the shaft which you are using and get sheared and also the coupling after output shaft.The input shaft dia 32 after reduction( ration...

I'm making an off road vehicle with Engine of Cummins 4BT, 1800 rpm, torque 269 pound-feet with portal axle gear box. Meanwhile i have increased the rpm to 3000 and...

Latest activities

T.Vikram Singh joined CrazyEngineers on Oct 12, 2016

Home Channels Search Login Register