PrinceTan
@princetan-P76mmI Member
- Member since
- Joined
- Last active
- Active
- Member number
- Member #114,659
- Posts
- 7
- Replies
- 18
- Reactions
- 0
- Active days
- 0
Contributions
Last 12 months
0 contributions
- Active days
- 0
- Longest run
- 0 days
- Current run
- 0 days
Trophies
Featured trophies
0 / 8
Swipe or scroll to see more trophies
-
Replied #Threads
Application specific problems: DC voltage comparator circuit
Here it is as promised.. Hope this can help others..
-
Replied #Threads
Application specific problems: DC voltage comparator circuit
Dear all CEians, I have successfully got the circuit up and running. My final circuit uses LM358 as the LM393 output is open drain configuration and...
-
Replied #Threads
Application specific problems: DC voltage comparator circuit
grsalviI cant help you much with comparator and transistor part,but as far as relay is concerned , read below : Please refer to circuit above. a)...
-
Replied #Threads
Application specific problems: DC voltage comparator circuit
jeffrey samuelI am not a great expert in this field but friends just solved this issue I guess here is his word verbatim Hope this clears...
-
Replied #Threads
Application specific problems: DC voltage comparator circuit
Can anybody please answer this question: Can a voltage comparator (or op-amp) IC like LM393 or LM358's output directly be fed into driving a 24V relay?...
-
Replied #Threads
Application specific problems: DC voltage comparator circuit
aruncharythank you Mr prince u r the engineering guy, sorry for that ,i dont know u know better than me, and one more thing i had...
-
Replied #Threads
Application specific problems: DC voltage comparator circuit
aruncharyyes it can be ,please follow the circuit as in pdfDear Mr. Arunchary Do you mind explaining why does it have to be that complicated? Can...
-
Replied #Threads
Application specific problems: DC voltage comparator circuit
I wanted to compare an input voltage (variable voltage from a battery, around 24V) to a reference voltage of 24V dc which will also serve as...
-
Replied #Threads
Speed Estimation Using a Moving Camera, Presumably Uncalibrated Camera
Just thought of that as well, but the application part may still change. Still undecided on the exact application to venture. Thanks for the feedback.
-
Replied #Threads
Speed Estimation Using a Moving Camera, Presumably Uncalibrated Camera
Btw, I was thinking of mounting the camera and the components to a moving car and using it as a sort of safety feature to notify...
-
Replied #Threads
Ubuntu Terminal capabilities
The first and foremost question is, can the terminal control an application or software to do a certain thing?
-
Replied #Threads
Any way to prevent condensation of steam to water at low temperatures (26-29 degrees)
bioramaniIf that is your problem all that you need to do is to provide good thermal insulation on the steam containing vessel. The heat transfer coefficient...
-
Replied #Threads
Any way to prevent condensation of steam to water at low temperatures (26-29 degrees)
Ammar AzizYes we can prevent the steam from condensation if we mix it with another compound to make a composite.Pls suggest the compound added to prevent...
-
Replied #Threads
Any way to prevent condensation of steam to water at low temperatures (26-29 degrees)
bioramaniThe saturated vapour pressure of water at 26C=0.0336 bar and at 29C = 0.0401 bar. If your concentration of steam is less than this in your...
-
Replied #Threads
Any way to prevent condensation of steam to water at low temperatures (26-29 degrees)
IssueWhat does it mean? Please post in detail.meaning I wanted to prevent condensation of water vapor from happening even at low surrounding temperature to drive a...
-
Replied #Threads
Combining a turbocharger and a supercharger together as a single unit, feasible?
If I get you right you're suggesting something similar to nitrous oxide injection right? Anyways, did some further research and found out that indeed it will...
-
Replied #Threads
Combining a turbocharger and a supercharger together as a single unit, feasible?
Yea, in a way to improve efficiency of the engine because I've seen some of the examples which combines the power from both chargers and the...
-
Replied #Threads
How to reduce frictional losses?
The use of magnetic force may also reduce friction of 2 sliding surface. An interesting idea which sprouted is to insert 2 magnets (or electromagnets) into...
Activity by month
Where PrinceTan contributes
-
#Threads 25 · 100%
Highlights
- Reactions per contribution
- 0.0
- Best answers
- 0
- Member for
- 15 years