dhruba sunuwar
@dhruba-sunuwar-yZGf9m Member
- Member since
- Joined
- Last active
- Active
- Member number
- Member #147,061
- Posts
- 23
- Replies
- 49
- Reactions
- 0
- Active days
- 0
Contributions
Last 12 months
0 contributions
- Active days
- 0
- Longest run
- 0 days
- Current run
- 0 days
Trophies
Featured trophies
0 / 8
Swipe or scroll to see more trophies
Recent contributions
-
Replied #Threads
16x2 lcd not responding properly
Harshad ItaliyaOk, if you can have dedicated 5v supply for motor and another 5v regulator for all other things then please try that and update the...
-
Replied #Threads
16x2 lcd not responding properly
thank you for the Arthur McKendryW/O looking at the actual LCD data sheet it would seem that your unused Data Input Pins D0,D1,D2 and D3 need...
-
Replied #Threads
16x2 lcd not responding properly
lalYes, it is. Use a source with higher current capacity. What is the maximum current capacity of the DC adapter you are using now and is...
-
Replied #Threads
16x2 lcd not responding properly
Harshad ItaliyaIn this case 7805 should provide enough current ! What is capacity of your adaptor?9v 0.85A
-
Replied #Threads
16x2 lcd not responding properly
Harshad ItaliyaCheck current consumption in both motor and post them here.the motor to which LCD wasnt responding draws 140mA and the one to which LCD responds...
-
Replied #Threads
16x2 lcd not responding properly
dhruba sunuwarhello!! i am working on a project which is a password protected door lock system. it uses, atmega32 microcontroller, a motor controlled by L293D motor...
-
Replied #Threads
16x2 lcd not responding properly
Abhishek RawalWhere is circuit diagram ?i have also uploaded the picture of the motor i have used.. when i used other motors it works properly but...
-
Posted #Threads
16x2 lcd not responding properly
hello!! i am working on a project which is a password protected door lock system. it uses, atmega32 microcontroller, a motor controlled by L293D motor driver,...
15 replies -
Posted #Threads
How to interface XBee with atmega 32?
i m thinking of doing a project that includes serial communication between Xbee module and atmega32 through USART. through some web browsing i found out that...
-
Replied #Threads
wire when coiled acts as electromagnet but shot circuit takes place when not coiled? y?
A.V.RamaniSays who? For DC current it is irrelevant whether it is a coil or straight. The resistance and hence the current will be the same. There...
-
Posted #Threads
wire when coiled acts as electromagnet but shot circuit takes place when not coiled? y?
A 5 meter wire when formed a coil and supplied voltage acts an electromagnet but when the same wire is not formed a coil and supplied...
4 replies -
Posted #Threads
How to interface smart card with AVR?
i have thought of making a door security system that uses smart card to lock and unlock. but i have no idea about any of the...
1 reply
Activity by month
Where dhruba contributes
-
#Threads 72 · 100%
Highlights
- Reactions per contribution
- 0.0
- Best answers
- 0
- Member for
- 14 years