dhruba sunuwar

dhruba sunuwar

dhruba sunuwar is an esteemed member of CrazyEngineers since Oct 10, 2012

Posts contributed: 72
Birthday: N/A

Harshad ItaliyaOk, if you can have dedicated 5v supply for motor and another 5v regulator for all other things then please try that and update the result. If that is...

thank you for the Arthur McKendryW/O looking at the actual LCD data sheet it would seem that your unused Data Input Pins D0,D1,D2 and D3 need to be connected. Most...

lalYes, it is. Use a source with higher current capacity. What is the maximum current capacity of the DC adapter you are using now and is it current limited? By...

Harshad ItaliyaIn this case 7805 should provide enough current ! What is capacity of your adaptor?9v 0.85A

Harshad ItaliyaCheck current consumption in both motor and post them here.the motor to which LCD wasnt responding draws 140mA and the one to which LCD responds properly draws 30mA. what...

dhruba sunuwarhello!! i am working on a project which is a password protected door lock system. it uses, atmega32 microcontroller, a motor controlled by L293D motor driver, a keypad and...

Abhishek RawalWhere is circuit diagram ?i have also uploaded the picture of the motor i have used.. when i used other motors it works properly but when the one shown...

hello!! i am working on a project which is a password protected door lock system. it uses, atmega32 microcontroller, a motor controlled by L293D motor driver, a keypad and a...

i m thinking of doing a project that includes serial communication between Xbee module and atmega32 through USART. through some web browsing i found out that these two devices have...

A.V.RamaniSays who? For DC current it is irrelevant whether it is a coil or straight. The resistance and hence the current will be the same. There is no short circuit.i...

Latest activities

dhruba sunuwar joined CrazyEngineers on Oct 10, 2012

Home Channels Search Login Register