Electronic fuel injection system
Hi CEngz,
Facing a new challenge in making "Electronic Fuel Injection System". We are developing a circuit such that it generates a square wave form signal (12V peak to peak). This output signal is fed to MOSFET/Solid State Relays to drive the injector operating at high current (20A) & High voltage (24V) from 2 car batteries connected in series. Can anyone suggest a part/item along with the connections. Any help would be appreciated.
Thank You.
Facing a new challenge in making "Electronic Fuel Injection System". We are developing a circuit such that it generates a square wave form signal (12V peak to peak). This output signal is fed to MOSFET/Solid State Relays to drive the injector operating at high current (20A) & High voltage (24V) from 2 car batteries connected in series. Can anyone suggest a part/item along with the connections. Any help would be appreciated.
Thank You.
Replies
-
techfreshthis will be use full for you #-Link-Snipped-#
You are reading an archived discussion.
Related Posts
Hi CEngz,
Facing a new challenge in making "Electronic Fuel Injection System". Using a PWM circuit, we generate a square wave form signal (5V peak to peak). This output signal...
Robot scans and solves Rubik's Cube in around 10 seconds
Read more: Robot scans and solves Rubik's Cube in around 10 seconds | News | The Engineer
YeY! CrazyEngineers came again with an Awesome and Awesome interview with one of our CE – Stars. He is CEan – xheavenlyx, a Crazy Electronics and Instrumentation Engineer who has...
HI,.... Currently im building a robot to participate in robowar. I need your suggestion,....
speed of motor
torque
which metal should i use to cover the robot
If anyone knows,...
Here is a short description of how DHCP works.
DHCP stands for dynamic host configuration protocol. It's a protocol that lets network admin to automate the assignment of IP addresses...