Al-Otaiby
Member
- Member since
- Aug 28, 2010
- Last active
- Jun 17, 2014
- Total activities
- 0
Activity feed
Recent contributions
-
#Threads
1c4f16c3-07c4-49ff-86c4-f091bc055982
Nowadays carbon fiber is manufactured in a way that replaces steel in certain places. as tensile strength and shear strength way more...
-
#Threads
Break resistance factor
Hello mates, Can you please give me a rough estimate for the break resistance factor for 3 pipes each one is 7...
-
#Threads
3e0ea23c-b4c0-4bdc-a991-6dba6ce7af75
Here you go buddy 😀 -Cylinder block in old engines and diesel engines are made of grey cast iron (it can take...
-
#Threads
bf117d24-06e1-4449-9938-9a259b4468be
I have everything at home, once I get back I'll check my university books and get back to you 😀
-
#Threads
How to displace moisture inside the distributor?
Spray a light coat of WD-40 Multi-Use Product inside vehicles' distributors to displace moisture after washing. This will start the engine easier...
-
#Threads
833aee08-c0d0-4d22-9e6b-44e7187008bf
I believe any suitable motor will work with you, even if it was a 220V AC! You can simply fix a DC-AC...
-
#Threads
0cb296cd-0889-46cd-884f-386621a62787
I totally agree with you buddy 😀 Its very important and I hope other drivers will be aware of this major point...
-
#Threads
2464621c-0809-4ab0-a75e-40916b5befad
In spur gears teeth suddenly meet at a line contact across their entire width causing stress and noise. Spur gears make a...
-
#Threads
How to Boost Your Car's Horsepower
Steps​ 1​​Upgrade to a free-flow aftermarket air filter Buy a free-flow air filter that fits your car. Open hood. Locate the air...
-
#Threads
f97a64b6-41f7-4fb2-9b32-88f88e7e68c3
Power[kw] ={torque[N-m]*pi*rotational speed in RPM }/30000 Power[kw]*30000 =torque[N-m]*pi*rotational speed in RPM TORQUE ={Power[kw]*30000}/pi*rotational s...
-
#Threads
Off-Road Driving Techniques and Safety
1) Read your owners manual thoroughly before going off-road, or on road for that matter. Learn your vehicle. 2) Never go out...
-
#Threads
water proof your distributor
Why shouldn't you use a "Rubber Glove" One of the worst things that you can do in this instance is to fit...