Thank you for all! I have completed transmitter many device with swap address .But i don't know with six receiver address when send data from 6 device to 6 address...

Harshad ItaliyaI'm not sure what you are asking now. Please explain.So i have more than 2 module to transmitter but I only open 2 pipe 0,1.I want more pipe and...

Harshad ItaliyaIf you want to receive from device 6 to Tx then you must have to swap address. suppose Tx = 1 and Rx6 = 15 then you have to...

Harshad ItaliyaIf you want to receive from device 6 to Tx then you must have to swap address. suppose Tx = 1 and Rx6 = 15 then you have to...

Harshad ItaliyaIf you want to receive from device 6 to Tx then you must have to swap address. suppose Tx = 1 and Rx6 = 15 then you have to...

rfm70_pipe_enable(2,1 ); rfm70_pipe_enable(3,1 ); rfm70_pipe_enable(4,1 ); rfm70_pipe_enable(5,1 ); rfm70_receive_address_p0( RX0_Address ); rfm70_receive_address_p1( RX1_Address ); rfm70_receive_address_pn( 2, 0x04 ); rfm70_receive_address_pn( 3, 0x05 ); rfm70_receive_address_pn( 4, 0x06 ); rfm70_receive_address_pn( 5, 0x07 );

Harshad ItaliyaFirst of all tell me are you able to Read SPI properly? If yes then Simply Swap Tx_address and RX0_Address while programming both boards.Hi godfather! I read spi finish...

i see about example code I see: const UINT8 RX0_Address[]={0x34,0x43,0x10,0x10,0x01};//Receive address data pipe 0 const UINT8 RX1_Address[]={0x39,0x38,0x37,0x36,0xc2};////Receive address data pipe 1 and /*//reg 10 - Rx0 addr SPI_Write_Buf((WRITE_REG|10),RX0_Address,5); //REG 11...

#ifdef device1 const UINT8 Tx_address[] ={0x00,0x00,0x00,0x00,0x01}; // Transmitter Address. const UINT8 RX0_Address[]={0x00,0x00,0x00,0x00,0x02};//Receive address data pipe 0 const UINT8 RX1_Address[]={0x00,0x00,0x00,0x00,0x03};////Receive address data pipe 1 #endif #ifdef device2 const UINT8 Tx_address[] ={0x00,0x00,0x00,0x00,0x02};...

Hi godfather! Im newbie at this forum. I have been working with the RFM70 too.And I want to communicate many Rfm70's moduls.But i don't understand about change address to communicate...