KaiL
@kail-Ss7cYk Member
- Member since
- Joined
- Last active
- Active
- Member number
- Member #96,669
- Posts
- 1
- Replies
- 15
- Reactions
- 0
- Active days
- 0
Contributions
Last 12 months
0 contributions
- Active days
- 0
- Longest run
- 0 days
- Current run
- 0 days
Trophies
Featured trophies
0 / 8
Swipe or scroll to see more trophies
-
Replied #Threads
Faster Finger Circuit - Doesn't work - Where did I go wrong?
KaiLNot really.my bad I write reply wrongly. it should be yes
-
Replied #Threads
Faster Finger Circuit - Doesn't work - Where did I go wrong?
bioramaniThat should work. Do you not have any electronic hobby shop where you can buy small lengths such wires?Not really.
-
Replied #Threads
Faster Finger Circuit - Doesn't work - Where did I go wrong?
bioramani1.51 Amps is small. Any hook up wire should work. Try a 0.5 mm[SUP]2 [/SUP]conductor. #-Link-Snipped-#So does this wire work for me? WIRE, TRI RATED, ORANGE,...
-
Replied #Threads
Faster Finger Circuit - Doesn't work - Where did I go wrong?
Hi again. Could you assist me with one problem? My circuit supply current is about 1.51 Ampere and I am wondering how kind of wires I...
-
-
Replied #Threads
Faster Finger Circuit - Doesn't work - Where did I go wrong?
bioramaniI still feel that you will be better off not using a voltage divider for the gate trigger. The circuit I had given with Zeners should...
-
Replied #Threads
Faster Finger Circuit - Doesn't work - Where did I go wrong?
#-Link-Snipped-# Uploaded with #-Link-Snipped-# Thanks again for your help. Maybe I have calculated wrongly somewhere in my circuit. Either the value of R1 or R2 which...
-
Replied #Threads
Faster Finger Circuit - Doesn't work - Where did I go wrong?
Could I check with you why the value of gate current is about 1 milli amp? Isn't the value of gate current at Max is 0.2...
-
Replied #Threads
Faster Finger Circuit - Doesn't work - Where did I go wrong?
#-Link-Snipped-# Uploaded with #-Link-Snipped-# Hi again. I have tried the circuit that you have come up using MultiSim but it doesn't work at all. Could you...
-
Replied #Threads
Faster Finger Circuit - Doesn't work - Where did I go wrong?
bioramaniWhy not look at the whole circuit again? What you need to do is to disable the gate of SCR 2 when SCR1 is on first...
-
Replied #Threads
Faster Finger Circuit - Doesn't work - Where did I go wrong?
bioramaniMCR-22 has a gate trigger current as low as 30 micro amps. The circuit shown in your diagram can easily trigger D3. I did not fully...
-
Replied #Threads
Faster Finger Circuit - Doesn't work - Where did I go wrong?
bioramaniWhat purpose does D4 serve? Can be removed I think. A Zener diode in series with J3 should help.From what my lecturer said , he said...
-
Replied #Threads
Faster Finger Circuit - Doesn't work - Where did I go wrong?
bioramaniI think that R1 and R2 are acting as a voltage divider. Ideally this junction should be at ground potential for preventing the gate of the...
-
Replied #Threads
Faster Finger Circuit - Doesn't work - Where did I go wrong?
I just try modify the connection where R2 is placed but still can't achieve the result I want. Could anyone give me some more idea how...
-
Replied #Threads
Faster Finger Circuit - Doesn't work - Where did I go wrong?
silk smitaFirst of all make neat connections in any type of simulation software. sometimes overlapping of two wires and wrong connections occurs because of this reason....
Activity by month
Where KaiL contributes
-
#Threads 16 · 100%
Highlights
- Reactions per contribution
- 0.0
- Best answers
- 0
- Member for
- 15 years