CrazyEngineers
CrazyEngineers
KaiL

KaiL

KaiL is an esteemed member of CrazyEngineers since Jul 4, 2011

Posts contributed
16
Birthday
N/A
Aug 3, 2011
KaiLNot really.my bad I write reply wrongly. it should be yes
Jul 28, 2011
bioramaniThat should work. Do you not have any electronic hobby shop where you can buy small lengths such wires?Not really.
Jul 27, 2011
bioramani1.51 Amps is small. Any hook up wire should work. Try a 0.5 mm[SUP]2 [/SUP]conductor. #-Link-Snipped-#So does this wire work for me? WIRE, TRI RATED, ORANGE, 0.5MM, 100M Reel Length...
Jul 26, 2011
Hi again. Could you assist me with one problem? My circuit supply current is about 1.51 Ampere and I am wondering how kind of wires I can use? I need...
Jul 25, 2011
I see. Thanks
Jul 21, 2011
bioramaniI still feel that you will be better off not using a voltage divider for the gate trigger. The circuit I had given with Zeners should work. Since your source...
Jul 17, 2011
#-Link-Snipped-# Uploaded with #-Link-Snipped-# Thanks again for your help. Maybe I have calculated wrongly somewhere in my circuit. Either the value of R1 or R2 which is why it doesn't...
Jul 16, 2011
Could I check with you why the value of gate current is about 1 milli amp? Isn't the value of gate current at Max is 0.2 milli amp based on...
Jul 14, 2011
#-Link-Snipped-# Uploaded with #-Link-Snipped-# Hi again. I have tried the circuit that you have come up using MultiSim but it doesn't work at all. Could you explain to me how...
Jul 13, 2011
bioramaniWhy not look at the whole circuit again? What you need to do is to disable the gate of SCR 2 when SCR1 is on first and vice versa. You...
Latest activities

    KaiL joined CrazyEngineers on Jul 4, 2011

Home Channels Search Login Register