raithrovers1

raithrovers1

Member

Member since
Feb 15, 2009
Last active
Mar 13, 2009
Total activities
0

Activity feed

Recent contributions

  1. #Threads

    bc8b8383-5d30-4188-b24c-da3f646720e0

    The circuit states that the gain is g=1+50k/Rg. Therfore your gain is 1+50k/80k. This is just over 1 so you would not...

  2. #Threads

    3280500b-c81f-47ba-aa56-bbc16e625dce

    What you have is two important building blocks for any circuits. An op amp with negative feedback and potential divider resistor network....

  3. #Threads

    62200324-0663-418a-b9c0-633366637cd8

    To build an inverter is extremely complex and would no doubt cause you much more problems than one you could already purchase...

  4. #Threads

    0cbe0ee1-cf27-4829-9f40-95be5d65c1f8

    I would probably start by saying you have two 12 volt relays. I would guess that these will control your output circuit....

  5. #Threads

    f9826a80-420b-49da-86a3-36ab1a32ae78

    All batteries have different ampere hour ratings which in turn mean they have different charging times. Also the discharging and charging of...

  6. #Threads

    674d1d4f-31f7-451f-8a5a-39f088d75df8

    As long as the UPS is an online UPS then it will act as a stabilizer. This should be stated in the...

  7. #Threads

    2209771a-eeeb-441e-a3f4-b9df0db2a1a8

    A little more info is needed on the converter that you are using. Is it just a voltage transformer that drops the...

  8. #Threads

    5f31bff1-bc9e-4fc9-9ad0-29444afe3b32

    This site has a calculator for your resistor values etc. #-Link-Snipped-# Hope it helps! Visit #-Link-Snipped-#

  9. #Threads

    41bfbc74-da6b-457d-93ca-4558855f819d

    An online UPS's main purpose is to continue to supply power when the mains power has failed using a battery back up....