SAIYAM KUMAR
@saiyam-kumar-bQbWZx Member
- Member since
- Joined
- Last active
- Active
- Member number
- Member #245,997
- Posts
- 2
- Replies
- 14
- Reactions
- 0
- Active days
- 0
Contributions
Last 12 months
0 contributions
- Active days
- 0
- Longest run
- 0 days
- Current run
- 0 days
Trophies
Featured trophies
0 / 8
Swipe or scroll to see more trophies
-
-
Replied #Threads
Gear design
No sir. I have searched about it enough on internet. My confusion is does the module has any relation with the tooth thickness?? That is.. Is...
-
Replied #Threads
crank and crank arm calculations
can you help me out with the calculations of springs. i am using a compression helical steel spring. the weight on the springs would be of...
-
-
Replied #Threads
crank and crank arm calculations
also tell me about the belt length which has to be mounted on the crank through the motor
-
Replied #Threads
crank and crank arm calculations
well i have made some calculations. to get a stroke of 2 mm i will have to offset my crank arm from the crank center by...
-
Replied #Threads
crank and crank arm calculations
thank you so much. it would indeed help me alot. please tell me about the crank. its diameter is going to be a problem. what should...
-
Replied #Threads
crank and crank arm calculations
yes i know the stroke length. it is twice of amplitude so it is around 2mm. yes the pan is horizontal and it does have sides...
-
Replied #Threads
crank and crank arm calculations
correction in the formula W is the width of the pan =18 inch d is the depth of the material=1inch
-
Replied #Threads
crank and crank arm calculations
there is a formula to calculate the linear flow rate of the load. It is TPH=WdBDs/4800 TPH is capacity in tonnes per hour=0.03 d is the...
-
Replied #Threads
crank and crank arm calculations
ok i ll clear u the concept. i need to provide a vibratory motion to a 8 foot pan through a motor driven crank. for that...
-
Replied #Threads
crank and crank arm calculations
Yes i need the calculations for crank arm length, strength bearing design. At the end of the crank arm is a 16 kg Stainless steel plate...
Activity by month
Where SAIYAM contributes
-
#Threads 16 · 100%
Highlights
- Reactions per contribution
- 0.0
- Best answers
- 0
- Member for
- 9 years