Debashish Sahoo
@debashish-gVrsHJ Member
- Member since
- Joined
- Last active
- Active
- Member number
- Member #175,944
- Posts
- 1
- Replies
- 19
- Reactions
- 0
- Active days
- 0
Contributions
Last 12 months
0 contributions
- Active days
- 0
- Longest run
- 0 days
- Current run
- 0 days
Trophies
Featured trophies
0 / 8
Swipe or scroll to see more trophies
Recent contributions
-
-
-
Replied #Threads
problem in 12v - 230v inverter
yes sir i remember... sir when i keep the potentiometer to minimum position transformer makes some sound.. i think our circuit part is correct because we...
-
Replied #Threads
problem in 12v - 230v inverter
Sir i am getting 46v ac at the output... but not 230v what should i do now?
-
Replied #Threads
problem in 12v - 230v inverter
hello sir, i have made another construction with all new component.. now i am getting 12v at drain of two FETs and 5.8v at gate terminal.....
-
-
Replied #Threads
problem in 12v - 230v inverter
sir capacitor and potentiometer are fine i have checked it. and about transformer i dont have spare right now tomorrow morning i will get one and...
-
Replied #Threads
problem in 12v - 230v inverter
1. after disconnecting one fet still there is no output at secondary 2. i replace the IC with the previous one and i tried with other...
-
Replied #Threads
problem in 12v - 230v inverter
Sir i have connected led in series with the drain pin of both the mosfet and one led i connected to the middle wire of transformer....
-
Replied #Threads
problem in 12v - 230v inverter
ok sir i will completely remove everything and try again and let you know
-
-
Replied #Threads
problem in 12v - 230v inverter
I tried everything as you said me.. but no response at secondary side. everything is perfect.. not if i adjust the pot there is no change...
-
Replied #Threads
problem in 12v - 230v inverter
sir now when i checked the transformer output i am not getting any output which i was getting previously 80v ac. at the primary side i...
-
Replied #Threads
problem in 12v - 230v inverter
Sir after using my multimeter i got the following details pin 10 FET : drain to +ve - 11v drain to +ve - 2.47A gate to...
-
Replied #Threads
problem in 12v - 230v inverter
yes sir i am using lead acid battery but now for testing i an using a rectifier. pin 11 is showing 5.8V and pin 10 showing...
-
Replied #Threads
problem in 12v - 230v inverter
I had tried to adjust the variable resister but there is very little change in the voltage level. I am using 12v to 230v center tapped...
-
Replied #Threads
problem in 12v - 230v inverter
at the input i.e at 0v input which is connected to +ve supply i am getting 12v and at 12v tapping i am getting 8v and...
-
Replied #Threads
problem in 12v - 230v inverter
i replace the IC now i am getting output from transformer but not 230v it is around 80v. what should i do now? i double checked...
-
Replied #Threads
problem in 12v - 230v inverter
thank you lal.. i will try with a new IC and let you know.
-
Posted #Threads
problem in 12v - 230v inverter
hello, i have made an inverter using cd4047 as per the circuit diagram i have uploaded here.. as per the circuit diagram gate pulse are given...
33 replies
Activity by month
Where Debashish contributes
-
#Threads 20 · 100%
Highlights
- Reactions per contribution
- 0.0
- Best answers
- 0
- Member for
- 12 years