Ankush Sharma

vikram singh tyield strength of the En353 material is around 620 N/mm^2Dear, From where did you get this yield strength? Because when i searched it on google, i found it...

vikram singh tit is off road vehicle, the total weight of the vehicle is 2.5 ton & shaft material is EN353, As you said 1500 RPM will be required when...

vikram singh tThe input shaft dia 32 after reduction( ration of 2:1)the output shaft dia is also maintained same.Consider the ratio as 2:1 instead of 1:2 as mentioned earlier.there is...

PRAD CHAKRABORTYCCD is Charge Coupled Device used in telescope as a camera to capture the photograph of celestial objects.The main cause of using SS rectangular tube or SS angle just...

vikram singh tI'm making an off road vehicle with Engine of Cummins 4BT, 1800 rpm, torque 269 pound-feet with portal axle gear box. Meanwhile i have increased the rpm to...

PRAD CHAKRABORTYI want to use the same for fabricating a structure to hold the charge coupled device(CCD)in a telescopeDear, First of all, i don't know exactly about CCD, i think...

A.V.Ramani1. Thinning the paint is a point of use issue. Adding thinner to paint increases bulk, packing and transportation costs. Customising the spreadability at the user end is lost. Thinners...

PRAD CHAKRABORTY---Sir, Please let me know how 150 has come while calculating the torqueDear, 150 is the radius(R) of disc. As your diameter is 300 mm, hence the radius is...

Dear, In industry, usually F.O.S considered for EOT Cranes is 5. And regarding Formula, F.O.S formula is same as usual(not specific for EOT). That is, F.O.S.=allowable stress/actual stress.

Dear, Be specific about your question. You are asking for SS, But also at the same time you want high tensile resistance. First of all, be clear that SS material...