Orthogonal and Oblique Cutting - Video lecture
The orthogonal and oblique types of cutting are explained in this video lecture. Understand manufacturing process better with lecture onOrthogonal and Oblique Cutting. Lecture Series on Manufacturing Processes II by Prof.A.B.Chattopadhyay, Department of Mechanical Engineering, IIT Kharagpur.
Feel Free to discuss and ask questions.
Feel Free to discuss and ask questions.
Replies
You are reading an archived discussion.
Related Posts
Lecture Series on Manufacturing Processes II by Prof.A.B.Chattopadhyay, Department of Mechanical Engineering, IIT Kharagpur.
Feel Free to discuss and ask questions.
The concept of machining forces explained in this lecture. Lecture Series on Manufacturing Processes II by Prof.A.B.Chattopadhyay, Department of Mechanical Engineering, IIT Kharagpur.
Feel Free to discuss and ask questions.
Lecture Series on Manufacturing Processes II by Prof.A.B.Chattopadhyay, Department of Mechanical Engineering, IIT Kharagpur.
Feel Free to discuss and ask questions.
Mechanical engineering topic: Dynamometers for Measuring Cutting Forces. Lecture Series on Manufacturing Processes II by Prof.A.B.Chattopadhyay, Department of Mechanical Engineering, IIT Kharagpur.
Feel Free to discuss and ask questions.
Lecture Series on Manufacturing Processes II by Prof.A.B.Chattopadhyay, Department of Mechanical Engineering, IIT Kharagpur.
CTCEAC --- Cutting Temperature Causes Effects Assessment and Control.
Feel Free to discuss and ask questions.