elevator control system by using plc
i am electrical/electronics technology student and i have a project in these one month about program elevator (6floor)using plc .i have no idea at all & how to start .i am looking for help and guidance to help me complete project.Thanks for your help.
Replies
-
manivannan.mvfriend
if need a complete knowledge about plc
refer plc programming by petrozula
its r rare book
You are reading an archived discussion.
Related Posts
Hey, I'm a Computer Engineering student, with some minimal experience in Electrical Engineering so far. My friend asked me how I could make a clock, preferably mechanical, play a song...
hi friends,
if we use network data model or hierarchical data model to design one of my database and use relational data model to design the other database.Then what is...
Hi all, Is it possible to call another program from main program using c or c++...
hi friends,
i want to know what are the difference in sumpner test and oc and sc test ?
.
๐
how many voltage and current is applied on the secondary side while performing on the sumpner,s test ?