Economical Transmission Line
Hey Friends,
Here is the way, you can suggest some ways to reduce the capital cost of Transmission Line.......
Give all your suggestions here regarding everything....means from construction of Poles to charging of Line thing on everything...........
Lets see who gives better option to reduce cost........
Suggest some PRACTICAL ways to reduce the cost....
Me waiting for your suggestions.......๐๐๐๐๐๐๐.........
Regards,
VIPUL
Here is the way, you can suggest some ways to reduce the capital cost of Transmission Line.......
Give all your suggestions here regarding everything....means from construction of Poles to charging of Line thing on everything...........
Lets see who gives better option to reduce cost........
Suggest some PRACTICAL ways to reduce the cost....
Me waiting for your suggestions.......๐๐๐๐๐๐๐.........
Regards,
VIPUL
Replies
-
Saandeep SreerambatlaCan you post what are your ideas first?
-
d_vipulhey buddy,
let me see first what other posts....
after 10 suggestions I will post my ideas........
Let me see whether other think like me or not.....
If I post my ideas, other will comment on those ideas instead of looking for new ideas......
Is that ok dude???
Regards,
VIPUL -
Saandeep SreerambatlaWe do have the same problem here! a dead lock ๐
If you get 10 ideas , what is the guarantee that you dont use one of those idea for your project or something?
Here at CE, we check and look at the work done by the person who asked the question! Then we will help him.
If you dont know please admit it. And no free lunches allowed here! -
d_vipulHey friend,
means you want my ideas to implement????
Just Kidding.........Don't take it seriously.....
My Suggestions:
1. For up to 11 kV Line we can use Hard Plastic Insulators.....Instead of those of we use normally.......
2. Instead of using metal nut and bolts for jointing purpose their also we can use Plastic made nuts and bolts this you can use at all levels................
(Note:I have tested this up to 22 kV,If you have good lab facilities You can test it for higher voltages and post your reply here).....
These suggestions will really help to reduce capital cost of Line.......
Likewise many more suggestions are their......
but I only mentioned these two.......
And Please don't you say these are not practical cause I have already tested these suggestions in my college LAB......
AND KIND REQUEST DO NOT WRITE SUCH THING AGAIN CAUSE IT MAY HURT SOMEONE....
CAUSE YOU ARE CHALLENGING SUCH ENGINEER YOU DON'T KNOW.....
Here at CE, we check and look at the work done by the person who asked the question! Then we will help him.
Regards,
If you dont know please admit it. And no free lunches allowed here!
VIPUL -
Saandeep SreerambatlaNice Ideas , and we donot copy others ideas , if we are using them we give due credit to them.
And as per my sentences above , dude there are many people who ask free lunches here! We have to be strict enough for that case so we have to put those statements.
And, you donot have to take it personal since, this intends to the one who ask for free lunches got it? -
d_vipulok dude.......
No Problem..... -
d_vipulHey friends,
Give me your suggestions I will test those suggestion for you.....
If they works i will give you its report.
Please reply to this thread.
Regards,
VIPUL -
Ashraf HZInteresting ๐
Forgive my ignorance, but what kind of plastics are we talking about here? Will environmental factors or mechanical stress play any detrimental affects on them? -
d_vipulhey it will not affect anything but it's life is only 7-8 years.
But it will save your capital cost definitely.
I cant give you its formula cause it is still under testing.
When we will complete testing then only I will reveal that....Ok???@ash -
aj_onduty
Hmmm! Its been a loooong time. Finished with the testing vipul???d_vipulhey it will not affect anything but it's life is only 7-8 years.
But it will save your capital cost definitely.
I cant give you its formula cause it is still under testing.
When we will complete testing then only I will reveal that....Ok???@ash
You are reading an archived discussion.
Related Posts
What is the difference between a hacker and a cracker???
who is superior??
And why??
Good Morning.
I am planning to develop Bus ticket booking application. I would like to know is there any 3rd part managing the inventory ? Because redbus and ticket ghoose...
this is my question .,right from the moment i entered here
WHY IS CE ASKING TO AVOID SMS TEXTS HERE??? ya, i know it may be bit difficult for some,...
Pls help me provide a circuit diagram on designing of a distance temperature laser guage to measure oil/winding temperatures of pole mounted transformers.
How is UMTS900 compared to UMTS 2100?
Will it affect the existing GSM 900?