CDAC CAT results announced. Which center to choose for VLSI?

@irocker-kpiCnd • Oct 26, 2024

Oct 26, 2024

2.1K

Hello All,

I completed B.Tech(ECE) in 2010 and have been working as a Software Engineer (working on Microsoft technologies) since then in an IT company. I now want to move back to my field of electronics by doing VLSI (or some other) specialization.

Q1. Would pursuing this 6-month PG Diploma in VLSI help me in fetching a career in VLSI at this stage of my career??

Please tell me little about Quality of education at C-DAC & its placements.

Also, I got 170 rank in C-CAT {D-VLSI, PG diploma}. I have three centers to choose from: C-DAC Pune, TICA Mumbai & Soft Polynomials, Nagpur.

Q2. Which center should I go for? What actually are my chances of getting into Pune center?

Like 0 Replies 49

Replies

Welcome, guest

Join CrazyEngineers to reply, ask questions, and participate in conversations.

CrazyEngineers powered by Jatra Community Platform

[Prototype]

@prototype-G9Gn5k • Dec 30, 2012

Answer to your first question is, it all depends on the concepts you've built during engineering. VLSI is a vast field and not to mention pretty challenging too, which is the reason there are so much lack of VLSI professionals in the industry.

Yes, to certain extent this course should help, atleast make you more than a 'fresher' and quickly productive for the company recruiting you.

I've already answered your second question in thhe other thread.
0
irocker

@irocker-kpiCnd • Dec 30, 2012

Thanx [Prototype]. Would you please also put light on quality of education C-DAC provides and its placements.
0
gunn

@gunn-xzwRVh • Dec 30, 2012

i got 1785 rank in dac entrance on 16 dec cdac exam.i want to know is dere ny chance to get gud institute for dac course..
0
max0077

@max0077-RbbXxe • Dec 30, 2012

gunn
i got 1785 rank in dac entrance on 16 dec cdac exam.i want to know is dere ny chance to get gud institute for dac course..
it's hard to get pune cdac or blore cdac but give them ur first priority ;after that sunbeam pune is also good in placements and studies ;u may get cdac hyd or other cdac aff. centre ..
0
max0077

@max0077-RbbXxe • Dec 30, 2012

#-Link-Snipped-# see this thread for more info.

0
max0077

@max0077-RbbXxe • Dec 30, 2012

gunn
i got 1785 rank in dac entrance on 16 dec cdac exam.i want to know is dere ny chance to get gud institute for dac course..
if u really wanna study in Cdac u can get Cdac noida or hyd or other related centre nd don't worry abt placements cos they r centralized..😀
0
max0077

@max0077-RbbXxe • Dec 31, 2012

irocker
Hello All,

I completed B.Tech(ECE) in 2010 and have been working as a Software Engineer (working on Microsoft technologies) since then in an IT company. I now want to move back to my field of electronics by doing VLSI (or some other) specialization.

Q1. Would pursuing this 6-month PG Diploma in VLSI help me in fetching a career in VLSI at this stage of my career??

Please tell me little about Quality of education at C-DAC & its placements.

Also, I got 170 rank in C-CAT {D-VLSI, PG diploma}. I have three centers to choose from: C-DAC Pune, TICA Mumbai & Soft Polynomials, Nagpur.

Q2. Which center should I go for? What actually are my chances of getting into Pune center?
why would you wanna leave microsoft?? ...and absolutely Cdac course helps build concepts nd strengthens them..but only Cdac pune acts provides best vlsi training(all d others r affiliated ones) and there r only 40 seats...
0
irocker

@irocker-kpiCnd • Dec 31, 2012

Dude, frankly speaking, working in a big IT firm isn't my cup of tea. Due to professional satisfaction, I want to move back to my field of study in which I did B.Tech and I am not working in Microsoft (MS). I am working on MS technologies like dot net, sharepoint etc. Please guide me on aforesaid points:

Would pursuing this 6-month PG Diploma in VLSI help me in fetching a career in VLSI at this stage of my career??
Please tell me little about Quality of education at C-DAC & its placements.
0
max0077

@max0077-RbbXxe • Dec 31, 2012

irocker
Dude, frankly speaking, working in a big IT firm isn't my cup of tea. Due to professional satisfaction, I want to move back to my field of study in which I did B.Tech and I am not working in Microsoft (MS). I am working on MS technologies like dot net, sharepoint etc. Please guide me on aforesaid points.
oh sorry dude i got the microsoft thing wrong...but if u are able to get Cdac pune in seat allotements than go for it ..
0
irocker

@irocker-kpiCnd • Dec 31, 2012

Hmm...n what could be the reason I only got these 3 options while giving priority: C-DAC Pune, TICA Mumbai & Soft Polynomials, Nagpur and not CDAC Bangalore, Hyd??? I have heard Bangalore is also good.
0
max0077

@max0077-RbbXxe • Dec 31, 2012

irocker
Hmm...n what could be the reason I only got these 3 options while giving priority: C-DAC Pune, TICA Mumbai & Soft Polynomials, Nagpur and not CDAC Bangalore, Hyd??? I have heard Bangalore is also good for VLSI.
it's because blore Cdac doesn't provide PG-DVLSI ..
0
max0077

@max0077-RbbXxe • Dec 31, 2012

max0077
it's because blore Cdac doesn't provide PG-DVLSI ...
blore nd HYD cdac provides embedded sys design course PG-DESD
0
irocker

@irocker-kpiCnd • Dec 31, 2012

oOPs!!!...Thanx a lot #-Link-Snipped-# for the information.

0
irocker

@irocker-kpiCnd • Jan 1, 2013

#-Link-Snipped-#, #-Link-Snipped-#, #-Link-Snipped-#: Friends, I also took exam for - DHI (11 candidates above me) and DASS (46 candidates above me) but in my list I have locked only for VLSI (169 above me). I think I have made a blunder. What you guys have to say. My interest is in VLSI (not embedded, though I know I can't ignore embbeded coming in my way).

0
[Prototype]

@prototype-G9Gn5k • Jan 1, 2013

irocker
#-Link-Snipped-#, #-Link-Snipped-#, #-Link-Snipped-#: Friends, I also took exam for - DHI (11 candidates above me) and DASS (46 candidates above me) but in my list I have locked only for VLSI (169 above me). I think I have made a blunder. What you guys have to say. My interest is in VLSI (not embedded, though I know I can't ignore embbeded coming in my way).
What doyou mean locked only VLSI? Please write here your preference list.

Besides, why you guys so eager to lock? It will ve automatically locked on 3rd. Why you're close the doors for yourselves?

0
irocker

@irocker-kpiCnd • Jan 1, 2013

Buddy, I just locked it before posting above comment. Anyway my preference list is like:

1 PG-DVLSI CDAC Pune
2 PG-DVLSI TICA Kandivali Mumbai
3 PG-DVLSI Soft Polynomials Nagpur
0
[Prototype]

@prototype-G9Gn5k • Jan 1, 2013

irocker
Buddy, I just locked it before posting above comment. Anyway my preference list is like:

1 PG-DVLSI CDAC Pune
2 PG-DVLSI TICA Kandivali Mumbai
3 PG-DVLSI Soft Polynomials Nagpur
Alright, its fine if you just want VLSI. Its actually wise to put only the course you wish to do.
0
irocker

@irocker-kpiCnd • Jan 1, 2013

[Prototype]
Alright, its fine if you just want VLSI. Its actually wise to put only the course you wish to do.
But I am asking for the other two. If you know something about DHI and DASS.
0
[Prototype]

@prototype-G9Gn5k • Jan 1, 2013

irocker
But I am asking for the other two. If you know something about DHI and DASS.
DHI, I dont know. DASS is pretty software related, SCADA. Anyways it doesnt matter now. Just leave this here. The more you will go inside, the more chances you will have regret on your choice. Now just wait and watch, what happens on 7th.
0
irocker

@irocker-kpiCnd • Jan 2, 2013

[Prototype]
DHI, I dont know. DASS is pretty software related, SCADA. Anyways it doesnt matter now. Just leave this here. The more you will go inside, the more chances you will have regret on your choice. Now just wait and watch, what happens on 7th.
Lets hope for the best! Good Luck to you too!
What is your preference list and ranks?
0
[Prototype]

@prototype-G9Gn5k • Jan 2, 2013

irocker
Lets hope for the best! Good Luck to you too!
What is your preference list and ranks?
My rank is 140.
75 above in VLSI
123 above in ES.

My preference is VLSI at Pune Acts and then ES at Pune Acts. Thats all.😀
0
Pushpendra2911

@pushpendra2911-jDyHgC • Jan 2, 2013

irocker
#-Link-Snipped-#, #-Link-Snipped-#, #-Link-Snipped-#: Friends, I also took exam for - DHI (11 candidates above me) and DASS (46 candidates above me) but in my list I have locked only for VLSI (169 above me). I think I have made a blunder. What you guys have to say. My interest is in VLSI (not embedded, though I know I can't ignore embbeded coming in my way).
tenson na lae kakke now its done and u took wise decision now dont think about anything else focus on preparing urself for 6 month of rigorous training ahead!!!!!!!!!!
ALL THE BEST

0
irocker

@irocker-kpiCnd • Jan 6, 2013

@#-Link-Snipped-#, @#-Link-Snipped-#, @#-Link-Snipped-#: Desparately waiting for the first list. . .

0
irocker

@irocker-kpiCnd • Jan 6, 2013

@#-Link-Snipped-#, @#-Link-Snipped-#, @#-Link-Snipped-#: I have got a seat in CDAC Pune for VLSI. Excited!!!

0
[Prototype]

@prototype-G9Gn5k • Jan 6, 2013

irocker
@#-Link-Snipped-#, @#-Link-Snipped-#, @#-Link-Snipped-#: I have got a seat in CDAC Pune for VLSI. Excited!!!
We'll be meeting up then...😉

0
max0077

@max0077-RbbXxe • Jan 7, 2013

irocker
@#-Link-Snipped-#, @#-Link-Snipped-#, @#-Link-Snipped-#: I have got a seat in CDAC Pune for VLSI. Excited!!!
great..good luck..

0
Pushpendra2911

@pushpendra2911-jDyHgC • Jan 7, 2013

irocker
@#-Link-Snipped-#, @#-Link-Snipped-#, @#-Link-Snipped-#: I have got a seat in CDAC Pune for VLSI. Excited!!!
gr8 news now buckle up buddy!!!!!!!!!! and good luck for the course

0
irocker

@irocker-kpiCnd • Jan 7, 2013

@#-Link-Snipped-#: As you're already there, would request you to share some study material (#-Link-Snipped-#) that would help me in coping up with VLSI course.
Also, please put some light on examination system? (In terms of pattern, difficulty level etc.)

0
Pushpendra2911

@pushpendra2911-jDyHgC • Jan 8, 2013

irocker
@#-Link-Snipped-#: As you're already there, would request you to share some study material (#-Link-Snipped-#) that would help me in coping up with VLSI course.
Also, please put some light on examination system? (In terms of pattern, difficulty level etc.)
sure i will do that will send u some ebooks which we have got here for reference start reading clear some prerequisite stuff it will give you a good n strong start up

0
irocker

@irocker-kpiCnd • Jan 8, 2013

Pushpendra2911
sure i will do that will send u some ebooks which we have got here for reference start reading clear some prerequisite stuff it will give you a good n strong start up
Thanx Pushpendra 😀
0
irocker

@irocker-kpiCnd • Jan 14, 2013

#-Link-Snipped-#, #-Link-Snipped-#, #-Link-Snipped-#: Guys, could you please provide me with some info on quality of education in CDAC Pune for VLSI diploma. It would be of great help in finalizing things today...'coz tomorrow is the last day to submit fee.

0
irocker

@irocker-kpiCnd • Jan 22, 2013

@#-Link-Snipped-#: When are you going to Pune?

0
[Prototype]

@prototype-G9Gn5k • Jan 23, 2013

irocker
@#-Link-Snipped-#: When are you going to Pune?
I'll go there by 22nd Feb.

0
G.Shankar

@gshankar-v15wRy • Aug 2, 2013

Hello all,
I completed my B.Tech in this year.
I have written the C-DAC and i got seat in PG-DVLSI in Soft Polynomials Nagpur.
Is it a best center to do..
please rply me..fast
0
kalyan548m

@kalyan548m-xg6mx4 • Aug 2, 2013

G.Shankar
Hello all,
I completed my B.Tech in this year.
I have written the C-DAC and i got seat in PG-DVLSI in Soft Polynomials Nagpur.
Is it a best center to do..
please rply me..fast
hey i got seat in TICA(dvlsi).
if u knw abt this plz inform me......
0
padhma_s

@padhma-s-ai0o1Y • Dec 23, 2013

Hi! i got overall rank of 295 and 150 above me have applied for PVLSI. Which centre will i get among pune,mumbai and nagpur. Is there any chance i could get pune?
0
Pankaj Kore

@pankaj-kore-ZuBhMs • Jan 2, 2014

A+B rabk is 207 with 186 students applied above for DAC..
What should be my preference form?Please help dont have much idea about this course..
0
Shrasti Awasthi

@shrasti-awasthi-xs2pk4 • Jan 5, 2014

Sir, I have got 252 rank in CAT 2014 exam for A+B section... Can i get admission in C dac Pune..???
0
3nadhs

@3nadhs-iph2pL • Jul 8, 2014

Hello all,
I completed my B.Tech(2014) in this year.
I have written the C-DAC(i got 1800 rank) and i got seat in PG-DVLSI in Soft Polynomials Nagpur.
Is it a best center to do..
Is it a best for placement........
please rply me..
i have less time to decide please reply me.....
0
3nadhs

@3nadhs-iph2pL • Jul 8, 2014

Hello all,
I completed my B.Tech(2014) in this year.
I have written the C-DAC(i got 1800 rank) and i got seat in PG-DVLSI in Soft Polynomials Nagpur.
Is it a best center to do..
Is it a best for placement........
please rply me..
i have less time to decide please reply me.....
0
Kaustubh Katdare

@thebigk • Jul 8, 2014

#-Link-Snipped-# - Please avoid posting the same question in multiple discussions. It's considered as spamming.

0
3nadhs

@3nadhs-iph2pL • Jul 8, 2014

sorry sir,
i am little bit hurry, because i have less time, so please reply.
0
Kaustubh Katdare

@thebigk • Jul 8, 2014

3nadhs
Hello all,
I completed my B.Tech(2014) in this year.
I have written the C-DAC(i got 1800 rank) and i got seat in PG-DVLSI in Soft Polynomials Nagpur.
Is it a best center to do..
Is it a best for placement........
please rply me..
i have less time to decide please reply me.....
Just enquire about their placements records and find out for yourself.
0
3nadhs

@3nadhs-iph2pL • Jul 8, 2014

sir,
just guide me what do you know about soft polynomials nagpur.
Is it god one....
i am just searched their website.i thought that placement is not good at their,
so please help me....... (i am from andhra pradesh).
0
Premanshu

@premanshu-nfMBEC • Aug 21, 2014

Hello, Iam a Fresher just completed my B.E in electronics and communication.I want to go for DVLSI.Please provide me information on how to get admission in there. Any entrance exams I have to clear ? and what is the course for that exam?
0
@kanshhaaaa

@at-kanshhaaaa-dJpy50 • Aug 5, 2015

hey guys I have got tica for the dvlsi course .. can anyone please help me know regarding the quality of teaching and education in that centre . would request you to share some study material (@#-Link-Snipped-#) that would help me in coping up with VLSI course.
Also, please put some light on examination system? (In terms of pattern, difficulty level etc.)

0
@kanshhaaaa

@at-kanshhaaaa-dJpy50 • Aug 5, 2015

hello guys, I have got tica for dvlsi course .. can anyone help me know regarding the quality of education and placements in that course .. I would also request you to share some study material (akshayamj14#-Link-Snipped-#) that would help me in coping up with VLSI course.
Also, please put some light on examination system? (In terms of pattern, difficulty level etc.)

0
Shubhangi Kulkarni

@shubhangi-kulkarni-xFccww • Jul 26, 2016

hello, I have got vlsi at soft polynomials, Nagpur..
plz help me to know quality of education and placements (specially placements)..
it's urgent..
0
Aekankshi

@aekankshi-bFTpvp • Jul 26, 2016

Hello sir,
I got cdac Mumbai juhu for pg DMC course is this center is good for placement and faculty wise sir plz help me
0