The Humble Cycle Rickshaw

Amith Gupta · 2010-11-28T22:49:52+00:00

Hi everyone, We've seen rickshaw pullers (though there are only a few left) straining very hard to carry 2-3 people for a ride.. Can something be thought about the chain and the pedal arrangement. . Couldn't there be some other mechanisms with which cheap but effective cycle rickshaws be made.! Comments invited))

Salil Bangale

Member • Nov 29, 2010

Cycle Rickshaw are present what exactly u want to do with it?

Are you sure? This action cannot be undone.

Cancel

Amith Gupta

Member • Nov 29, 2010

I wanted to know if there could be some other principle other than cycling .. by which it could be made better

Are you sure? This action cannot be undone.

Cancel

gohm

Member • Nov 29, 2010

Lots of ways to assist this. Lighter material or gearing can improve efficiency. Also, moving the operator into a reclining position will allow for more power in pedaling. other ways would be to add power assist via an electric or IC engine.

Are you sure? This action cannot be undone.

Cancel

Salil Bangale

Member • Nov 29, 2010

air powered engines can be a cleaner option to drive

Are you sure? This action cannot be undone.

Cancel

ISHAN TOPRE

Member • Dec 22, 2010

Modern rickshaws like solecshaws have been developed quite some time now.However their production is not done.

Are you sure? This action cannot be undone.

Cancel

Amith Gupta

Member • Jan 4, 2011

How about using a hydraulic mechanism... If the operator pushes it with little force.. We could generate much greater forces that can make the cycling easier... But how does that accomodate there coz cycling is a rotary operation
.................... Comments welcomed!!

Are you sure? This action cannot be undone.

Cancel

ISHAN TOPRE

Member • Jan 4, 2011

There is a possibility that we can use air as working fluid and use simple piston cylinder arrangement accompanied by chain and sprocket mechanism.
It is difficult for man to to compress air beyond a certain limit that is why we need to use a chain and sprocket.

Are you sure? This action cannot be undone.

Cancel

rajevnaik

Member • May 11, 2011

I HAVE DEVELOPED NEW DRIVING MECHANISM FOR BICYCLE/RICKSHAW HAVING FOLLOWING ADVANTAGES OVER CONVENTIONAL SYSTEM.

I AM READY TO SELL THE INVENTION ALONG WITH PATENT RIGHTS / COMMERCIAL DEVELOPMENT & SELLING RIGHTS ON MUTUALLY AGREED TERMS & CONDITIONS.

IN CASE YOUR COMPANY IS INTERESTED, PL. CONTACT ME. MY MOBILE NO. IS +919424140739.

BICYCLE DRIVING DETAILED STUDY & IMPROVEMENT POSSIBLE
Although Bicycle is very old invention, the basic mechanism of driving has remained same without any major change over the years. Based on personal driving experience & by observing others, I had tried to study this mechanism in depth & had found out following disadvantages (potential for improvement) in existing system.

Disadvantages of present Cycle driving mechanism:

1. One leg driving only: In circular paddling system, one leg only is used for giving motive force at any instant of time. The driving takes place due to left and right foot pressing the paddle downwards one by one (alternately).

2. Partial are driving: Out of the complete circular rotation of the paddle, only around 50% of movement is utilised for driving while other 50% is just moved for bringing paddle into the next driving place.

Here it is to be noted that no driver puts his efforts for driving the paddle when it is vertical at dead centre. He starts exerting pressure only when the paddle has made about 40-50 deg. angle from vertical, hence driving torque is zero at paddle orientations of 0, 180 deg. and their multiples.

3. Maximum force applied on paddle is generally less than drivers own weight: In normal driving the driver remains seated on his seat and applies downward force on paddles as much as he can without lifting himself from the seat. Obviously, this force is very less than his weight. His legs are naturally capable of lifting more than his own weight if required, but this capacity is not utilised.

4. Applying force more than driver’s own weight: For applying force more than his own weight, a driver feels that normal driving with sitting positions is not adequate. In such conditions, he stands on the paddles and applies his full weight on the paddles. When this also becomes insufficient for required acceleration, he “pulls the handles up” for getting more downward reaction transmitted to paddles. This reaction is transmitted through tension in driver’s hands and stress in his back in very inconvenient posture, which causes back pain and associated fatigue.

5. Limitation of force application due to relatively straight leg: During cycling, the work done comes from movement of muscles of legs, which is nothing but changing angles of thighs and knees. For any particular driving rotation of paddle (segment of driving rotation of paddle) the angle turned through by thighs and knees can be an indication of work done assuming that maximum possible force (constant) is applied all the time. But since the paddle during its driving segment of rotation, lies very much below the seat of the driver, the leg remains relatively straight and this angle turned through by thighs and knees is not much. Also the force which fully bent leg can apply easily is difficult to be applied by a leg, which is reasonable straight with only little bending at thighs and knees.

Considering all these demerits, I had tried to device a new system, which addresses these disadvantages & offers improvements in all these aspects. I was able to device such a new system that has advantages over the existing system as mentioned below:

ADVANTAGES OF NEW DRIVING MECHANISM

BY- R. P. NAIK

1. Both legs can drive simultaneously: Due to independent nature of driving both of the legs can be utilised for driving simultaneously whenever required. This will help in dead start or accelerating with high load at step gradients or rough tar rain etc.

2. Continuous driving torque: The driving force on the rear wheel (s) will be a continuous one. As soon as a leg finishes its driving stroke the other leg will start its driving stroke and hence virtually there will be no time of zero torque.

3. More force than driver’s weight can be applied without fatigue: The backrest provided will give support to driver in such a way that by utilizing reaction from backrest, the driver can put on force more than his own weight whenever required.

4. No stress in portion above the waist: Due to same backrest, there will be no stress developed above the waist and back pen and hand tension will be eliminated.

5. More angle turned by thighs & knees ensure more force available when required: Due to position of seat and paddle, the angle turned through by thigh and knee for any stroke of driving will be more than corresponding angle in case of ordinary cycle (rickshaw) hence there will be more work done available per driving stroke of the paddle.

6. Crippled persons can use their able leg: The same system of driving can be utilised for handicapped person’s tricycles. In these, the handicapped person can use his able leg along with his hand for driving the tricycle. If the amputation of a leg is below the knee; than he can use even his stump as well as his able leg for driving with the help of suitable padding and paddle modification.

7. Easy adaptability for existing manufacturers: Once this system proves its utility and is accepted for increased speed /load carrying capacity of rickshaw, the existing cycles or rickshaw manufactures can easily convert to this design without altering many of their facilities.

8. Gear arrangements: Suitable gear arrangements will enhance speed / load carrying capabilities tremendously.

Are you sure? This action cannot be undone.

Cancel

rajevnaik

Member • May 11, 2011

I HAVE DEVELOPED NEW DRIVING MECHANISM FOR BICYCLE/RICKSHAW HAVING FOLLOWING ADVANTAGES OVER CONVENTIONAL SYSTEM.

I AM READY TO SELL THE INVENTION ALONG WITH PATENT RIGHTS / COMMERCIAL DEVELOPMENT & SELLING RIGHTS ON MUTUALLY AGREED TERMS & CONDITIONS.

IN CASE YOUR COMPANY IS INTERESTED, PL. CONTACT ME. MY MOBILE NO. IS +919424140739.

BICYCLE DRIVING DETAILED STUDY & IMPROVEMENT POSSIBLE
Although Bicycle is very old invention, the basic mechanism of driving has remained same without any major change over the years. Based on personal driving experience & by observing others, I had tried to study this mechanism in depth & had found out following disadvantages (potential for improvement) in existing system.

Disadvantages of present Cycle driving mechanism:

1. One leg driving only: In circular paddling system, one leg only is used for giving motive force at any instant of time. The driving takes place due to left and right foot pressing the paddle downwards one by one (alternately).

2. Partial are driving: Out of the complete circular rotation of the paddle, only around 50% of movement is utilised for driving while other 50% is just moved for bringing paddle into the next driving place.

Here it is to be noted that no driver puts his efforts for driving the paddle when it is vertical at dead centre. He starts exerting pressure only when the paddle has made about 40-50 deg. angle from vertical, hence driving torque is zero at paddle orientations of 0, 180 deg. and their multiples.

3. Maximum force applied on paddle is generally less than drivers own weight: In normal driving the driver remains seated on his seat and applies downward force on paddles as much as he can without lifting himself from the seat. Obviously, this force is very less than his weight. His legs are naturally capable of lifting more than his own weight if required, but this capacity is not utilised.

4. Applying force more than driver’s own weight: For applying force more than his own weight, a driver feels that normal driving with sitting positions is not adequate. In such conditions, he stands on the paddles and applies his full weight on the paddles. When this also becomes insufficient for required acceleration, he “pulls the handles up” for getting more downward reaction transmitted to paddles. This reaction is transmitted through tension in driver’s hands and stress in his back in very inconvenient posture, which causes back pain and associated fatigue.

5. Limitation of force application due to relatively straight leg: During cycling, the work done comes from movement of muscles of legs, which is nothing but changing angles of thighs and knees. For any particular driving rotation of paddle (segment of driving rotation of paddle) the angle turned through by thighs and knees can be an indication of work done assuming that maximum possible force (constant) is applied all the time. But since the paddle during its driving segment of rotation, lies very much below the seat of the driver, the leg remains relatively straight and this angle turned through by thighs and knees is not much. Also the force which fully bent leg can apply easily is difficult to be applied by a leg, which is reasonable straight with only little bending at thighs and knees.

Considering all these demerits, I had tried to device a new system, which addresses these disadvantages & offers improvements in all these aspects. I was able to device such a new system that has advantages over the existing system as mentioned below:

ADVANTAGES OF NEW DRIVING MECHANISM

BY- R. P. NAIK

1. Both legs can drive simultaneously: Due to independent nature of driving both of the legs can be utilised for driving simultaneously whenever required. This will help in dead start or accelerating with high load at step gradients or rough tar rain etc.

2. Continuous driving torque: The driving force on the rear wheel (s) will be a continuous one. As soon as a leg finishes its driving stroke the other leg will start its driving stroke and hence virtually there will be no time of zero torque.

3. More force than driver’s weight can be applied without fatigue: The backrest provided will give support to driver in such a way that by utilizing reaction from backrest, the driver can put on force more than his own weight whenever required.

4. No stress in portion above the waist: Due to same backrest, there will be no stress developed above the waist and back pen and hand tension will be eliminated.

5. More angle turned by thighs & knees ensure more force available when required: Due to position of seat and paddle, the angle turned through by thigh and knee for any stroke of driving will be more than corresponding angle in case of ordinary cycle (rickshaw) hence there will be more work done available per driving stroke of the paddle.

6. Crippled persons can use their able leg: The same system of driving can be utilised for handicapped person’s tricycles. In these, the handicapped person can use his able leg along with his hand for driving the tricycle. If the amputation of a leg is below the knee; than he can use even his stump as well as his able leg for driving with the help of suitable padding and paddle modification.

7. Easy adaptability for existing manufacturers: Once this system proves its utility and is accepted for increased speed /load carrying capacity of rickshaw, the existing cycles or rickshaw manufactures can easily convert to this design without altering many of their facilities.

8. Gear arrangements: Suitable gear arrangements will enhance speed / load carrying capabilities tremendously.

Are you sure? This action cannot be undone.

Cancel

Amith Gupta

Member • May 11, 2011

that is a really good alternative my friend. But you are expecting far too much.. am just a student who had a thought on it. Anyways Regards
- Amith

Are you sure? This action cannot be undone.

Cancel

PraveenKumar Purushothaman

Member • May 11, 2011

Dude, the main concept behind cycle rickshaws are working not using engines. If we had an engine powering the rickshaws the core concept is gone. So, it is better to think something without using an engine or powered stuff, which pollutes the environment.

Are you sure? This action cannot be undone.

Cancel