CrazyEngineers
  • Scrolling LED Display without using uP..!!

    RRITESH

    Member

    Updated: Oct 22, 2024
    Views: 1.5K
    Hi,


    Check my project, Scrolling displays in numeric.

    In this project i have used basic logical IC's which are common to all student.
    here is the list of component used.

    [FONT=&quot]1.) [/FONT][FONT=&quot]Power supply (12V).[/FONT]
    [FONT=&quot]2.) [/FONT][FONT=&quot]Clock pulse ( 555 IC).[/FONT]
    [FONT=&quot]3.) [/FONT][FONT=&quot]Decade counters ( 4017 IC).[/FONT]
    [FONT=&quot]4.) [/FONT][FONT=&quot]Couple of AND GATES ( CMOS 4081/ TTL 7408).[/FONT]
    [FONT=&quot]5.) [/FONT][FONT=&quot]SEVEN Segment display (as per message).[/FONT]
    [FONT=&quot]6.) [/FONT][FONT=&quot]BCD to SEVEN Segment Driver ( IC TTL 7447/ CMOS 4011).[/FONT]
    [FONT=&quot]7.) [/FONT][FONT=&quot]OR GATES (7432).[/FONT]
    [FONT=&quot]8.) [/FONT][FONT=&quot]A wire, PCB, switches, etc…[/FONT]

    Here is a video:
    [video=youtube;C9WN89WEUnw]https://www.youtube.com/watch?v=C9WN89WEUnw[/video][FONT=&quot]
    [/FONT]
    0
    Replies
Howdy guest!
Dear guest, you must be logged-in to participate on CrazyEngineers. We would love to have you as a member of our community. Consider creating an account or login.
Replies
  • Ankita Katdare

    AdministratorMar 21, 2011

    Nice Presentation. It looks like you did this project out of interest. 😀
    Cool! Welcome to CE :welcome:
    Are you sure? This action cannot be undone.
    Cancel
  • ISHAN TOPRE

    MemberMar 22, 2011

    Good Mr.Rritesh. the project is good. you did it all alone 😀
    simply awesome.
    Are you sure? This action cannot be undone.
    Cancel
  • RRITESH

    MemberMar 22, 2011

    ishutopre
    Good Mr.Rritesh. the project is good. you did it all alone 😀
    simply awesome.

    Yeah, i have done this alone.
    Are you sure? This action cannot be undone.
    Cancel
  • narayana murthy

    MemberMar 22, 2011

    nice work buddy
    Are you sure? This action cannot be undone.
    Cancel
  • Harshad Italiya

    MemberMar 22, 2011

    I too have Designed the Scrolling Display but it was with micro-controller and also connected with GSM Modem,
    BTW Nice presentation.
    Are you sure? This action cannot be undone.
    Cancel
  • RRITESH

    MemberMar 23, 2011

    I too have Designed the Scrolling Display but it was with micro-controller and also connected with GSM Modem,
    BTW Nice presentation.
    Hi,

    i also want to see it.
    Are you sure? This action cannot be undone.
    Cancel
  • Harshad Italiya

    MemberMar 23, 2011

    Here it is

    [youtube]l3mkNhTZ3Bc[/youtube]​
    Are you sure? This action cannot be undone.
    Cancel
  • RRITESH

    MemberMar 23, 2011

    I don't know about microprocessor, tell about kits for making projects what the cost of it??
    Are you sure? This action cannot be undone.
    Cancel
  • narayana murthy

    MemberMar 23, 2011

    gf is you made with micro processor or micro controller
    Are you sure? This action cannot be undone.
    Cancel
  • Harshad Italiya

    MemberMar 23, 2011

    narayana murthy
    gf is you made with micro processor or micro controller
    It is with Microcontroller buddy.
    Are you sure? This action cannot be undone.
    Cancel
  • Harshad Italiya

    MemberMar 23, 2011

    RRITESH
    I don't know about microprocessor, tell about kits for making projects what the cost of it??
    I have not used KIT for this project. and not sure kit price is depend on the feature you want i think so.
    Are you sure? This action cannot be undone.
    Cancel
  • RRITESH

    MemberMar 25, 2011

    Please, tell me about uP, how to use it for starting simple projects!!
    Are you sure? This action cannot be undone.
    Cancel
  • Harshad Italiya

    MemberMar 25, 2011

    RRITESH
    Please, tell me about uP, how to use it for starting simple projects!!
    With Microprocessor i think you need to interface other devices but the use of Microcontoller is far better for that first start reading basics about Microcontroller 8051.
    Are you sure? This action cannot be undone.
    Cancel
  • narayana murthy

    MemberMar 25, 2011

    godfather
    With Microprocessor i think you need to interface other devices but the use of Microcontoller is far better for that first start reading basics about Microcontroller 8051.
    but gf its better to start with micro processor because it is better to understand than micro controllers
    Are you sure? This action cannot be undone.
    Cancel
  • Harshad Italiya

    MemberMar 25, 2011

    narayana murthy
    but gf its better to start with micro processor because it is better to understand than micro controllers
    Yeah it is but Microcontroller is not that much hard. after depends on the person and his/her interest in the field. 😀
    Are you sure? This action cannot be undone.
    Cancel
  • narayana murthy

    MemberMar 25, 2011

    godfather
    Yeah it is but Microcontroller is not that much hard. after depends on the person and his/her interest in the field. 😀
    ok nice then gf do you seen my explaining concept on history of micro controller
    Are you sure? This action cannot be undone.
    Cancel
  • Harshad Italiya

    MemberMar 25, 2011

    narayana murthy
    ok nice then gf do you seen my explaining concept on history of micro controller
    Not yet but visit it very soon. 😀
    Are you sure? This action cannot be undone.
    Cancel
  • RRITESH

    MemberMar 25, 2011

    I am studying uP 8085, 8086,etc tell me the kit what the name of it & cost.

    Thanks.
    Are you sure? This action cannot be undone.
    Cancel
  • narayana murthy

    MemberMar 25, 2011

    i think it is just an IC
    you have to interface others with it
    Are you sure? This action cannot be undone.
    Cancel
  • RRITESH

    MemberMar 25, 2011

    narayana murthy
    i think it is just an IC
    you have to interface others with it

    Hello,

    if you know then please tell in details, rather then typing few words!!
    Are you sure? This action cannot be undone.
    Cancel
  • narayana murthy

    MemberMar 25, 2011

    RRITESH
    Hello,

    if you know then please tell in details, rather then typing few words!!

    <a href="https://en.wikipedia.org/wiki/Microprocessor" target="_blank" rel="nofollow noopener noreferrer">Microprocessor</a>
    i think this will be more helpful
    then my explanation
    Are you sure? This action cannot be undone.
    Cancel
  • RRITESH

    MemberMar 25, 2011

    I have readied many pdf, i am talking about practical, when you started it what was the processor the cost of kit you have, all this i am asking..

    thanks.
    Are you sure? This action cannot be undone.
    Cancel
  • Harshad Italiya

    MemberMar 25, 2011

    RRITESH
    I have readied many pdf, i am talking about practical, when you started it what was the processor the cost of kit you have, all this i am asking..

    thanks.
    I will try to get some link for you mate.
    Are you sure? This action cannot be undone.
    Cancel
  • narayana murthy

    MemberMar 26, 2011

    godfather
    I will try to get some link for you mate.
    i had tried gf but it is showing about total CPU cost but not about UP cost
    if you found any nice link tell me too
    Are you sure? This action cannot be undone.
    Cancel
  • Harshad Italiya

    MemberMar 26, 2011

    narayana murthy
    i had tried gf but it is showing about total CPU cost but not about UP cost
    if you found any nice link tell me too
    Sure NM. 😀
    Are you sure? This action cannot be undone.
    Cancel
  • RRITESH

    MemberMar 29, 2011

    godfather
    I will try to get some link for you mate.
    Hi, Where are the link??
    Are you sure? This action cannot be undone.
    Cancel
  • RRITESH

    MemberMar 29, 2011

    Hi, these are the stimulation of this scrolling led display Video

    <a href="https://www.youtube.com/watch?v=nNYkSOEkZ2g&feature=mfu_in_order&list=UL" target="_blank" rel="nofollow noopener noreferrer">- YouTube</a>

    and it working.

    <a href="https://www.youtube.com/watch?v=g_Rc8HM42Zg&feature=mfu_in_order&list=UL" target="_blank" rel="nofollow noopener noreferrer">- YouTube</a>
    Are you sure? This action cannot be undone.
    Cancel
  • RRITESH

    MemberApr 2, 2011

    godfather
    I will try to get some link for you mate.
    Hi, where are the link??
    Are you sure? This action cannot be undone.
    Cancel
  • Harshad Italiya

    MemberApr 2, 2011

    RRITESH
    Hi, where are the link??
    Still not found any mate.
    Are you sure? This action cannot be undone.
    Cancel
  • RRITESH

    MemberApr 6, 2011

    You know about assembly lang.??
    Are you sure? This action cannot be undone.
    Cancel
  • Harshad Italiya

    MemberApr 6, 2011

    RRITESH
    You know about assembly lang.??
    No i usually use C for writing code. 😀
    Are you sure? This action cannot be undone.
    Cancel
  • narayana murthy

    MemberApr 6, 2011

    godfather
    No i usually use C for writing code. 😀
    good option gf masm or tasm programming takes much time and long
    Are you sure? This action cannot be undone.
    Cancel
  • RRITESH

    MemberApr 6, 2011

    Ok, what kit you have used for burning pics??
    Are you sure? This action cannot be undone.
    Cancel
  • Harshad Italiya

    MemberApr 6, 2011

    RRITESH
    Ok, what kit you have used for burning pics??
    Well Pritesh there are PICKIT available for PIC.
    But i am using freescale mostly and i think it has no any open-source programmer available.
    Are you sure? This action cannot be undone.
    Cancel
  • RRITESH

    MemberApr 7, 2011

    Why don't you give full details of it?? can you post pics of your kit??
    Are you sure? This action cannot be undone.
    Cancel
  • Harshad Italiya

    MemberApr 7, 2011

    RRITESH
    Why don't you give full details of it?? can you post pics of your kit??
    Well Pritesh,
    I am not using any KIT for controller i just use programmer and i am using Freescale microcontroller not PIC and the PICKIT is basically not Kit its Programmer name first be clear that which controller you want to use there are so many microcontroller company and its not possible to buy the programmer of all the controller so i suggest that first make sure that on which platform you want to start your work. hop this things make the clear vision for you.
    Are you sure? This action cannot be undone.
    Cancel
  • Reya

    MemberApr 7, 2011

    Cool presentation 😀
    Are you sure? This action cannot be undone.
    Cancel
  • narayana murthy

    MemberApr 7, 2011

    godfather
    Well Pritesh,
    I am not using any KIT for controller i just use programmer and i am using Freescale microcontroller not PIC and the PICKIT is basically not Kit its Programmer name first be clear that which controller you want to use there are so many microcontroller company and its not possible to buy the programmer of all the controller so i suggest that first make sure that on which platform you want to start your work. hop this things make the clear vision for you.
    but gf i got a doubt once i had asked my friend about micro controllers
    he said that there available of 2 types with programmed and without programmed
    is he right i am confused by listening to that
    Are you sure? This action cannot be undone.
    Cancel
  • Harshad Italiya

    MemberApr 8, 2011

    narayana murthy
    but gf i got a doubt once i had asked my friend about micro controllers
    he said that there available of 2 types with programmed and without programmed
    is he right i am confused by listening to that
    Is your friend working on Microcontroller?

    well microcontroller is a device which you can program according to your application. See if i buy a controller that is without programmed and i write code for my application and load into that and sell it to you then it becomes with program. 😁 😛
    Are you sure? This action cannot be undone.
    Cancel
  • narayana murthy

    MemberApr 8, 2011

    godfather
    Is your friend working on Microcontroller?

    well microcontroller is a device which you can program according to your application. See if i buy a controller that is without programmed and i write code for my application and load into that and sell it to you then it becomes with program. 😁 😛
    😛 no my friend is also same as me just i had asked about available of micro controllers in our nearest place so he answered like that
    Are you sure? This action cannot be undone.
    Cancel
  • Harshad Italiya

    MemberApr 9, 2011

    narayana murthy
    😛 no my friend is also same as me just i had asked about available of micro controllers in our nearest place so he answered like that
    😎 Hop now the things is clear for you.
    Are you sure? This action cannot be undone.
    Cancel
  • narayana murthy

    MemberApr 9, 2011

    godfather
    😎 Hop now the things is clear for you.
    ya i got it thanks
    Are you sure? This action cannot be undone.
    Cancel
  • RRITESH

    MemberJun 8, 2011

    Hello again,


    this time i want to know about 8051 kit, from where to get this @ what cost??


    thanks
    Are you sure? This action cannot be undone.
    Cancel
  • Ritesh KAKKAR

    MemberSep 1, 2024

    Ritesh

    Are you sure? This action cannot be undone.
    Cancel
Home Channels Search Login Register