robotic arm >acrylic or hardwood??
i making my own robotic arm parts but the problem is which is best choice to make it???acylic or hardwood?? shud i use cnc machine or leth ?? i will then attach servos in arm so my concern is cheap and light weight material (enough to handle the weight of arm)
Replies
-
raaj90any out there can reply me??
You are reading an archived discussion.
Related Posts
Hi everybody
I found one good resource of receiving Online Certification like CCNA / CCNP / ORACLE OCP / SOLARIS - JAVA / ITIL / HP / SYMENTEC NETBACKUP etc...
hai. Iam anish
Mechanical vibrations is an important topic in engineering mechanics and mechanical engineering. Lecture Series on Mechanical Vibrations by Prof.Rajiv Tiwari, Department of Mechanical Engineering, IIT Guwahati.
You can ask questions...
This video lecture will cover the Vibration Model, Equation of Motion-Natural Frequency. Lecture Series on Mechanical Vibrations by Prof.Rajiv Tiwari, Department of Mechanical Engineering, IIT Guwahati.
You can ask questions...
An important lecture on the topic of Viscously Damped Free Vibration Special Cases.
Lecture Series on Mechanical Vibrations by Prof.Rajiv Tiwari, Department of Mechanical Engineering, IIT Guwahati.
You can ask...