RC BIKES!! Have a look!!
New
PLZZ see this. Mind blowing. THere is also a moto-X version of these
Replies
-
Debasish716 -
Debasish716Cant we build one?? Its just bringing together simple yet pwerful motors together for propulsion. The hard part comes in aligning the wheels and in making the bike tilt up and down for turning. Mind you during the turns,u dnt have to fear bout falling as there are guard rails(sort of) at the two sides which limit the inclination. The trick is to balance the bike wen travelling straight. May b we can eliminate the guard rails by using gyro or smthing but thats too involved. C'mon CEans give ideas!!!!!!!
You are reading an archived discussion.
Related Posts
Check this out guys!!! 😀 Saw this recently and it is awesome!!! 😀
Here is blow molding process explained.
Check this out. (I was a BAD writer at that time. Concentrate on meaning rather than grammar ☕)
https://www.crazyengineers.com/blow-molding-process-explained/
Here is plastic injection process explained. There was a guy called Soni, owner of OfficeMate brand. He had started from a blow molding and injection molding industry.
Check this out....
HELLO,I AM CURRENTLY PURSUING MY ENGINEERING DEGREE FORM CMRIT,BANGALORE...MY BRANCH IS ISE!!I AM IN 6TH SEM AND HAVE GOT A TOTAL AGGREGATE OF 67%(FROM 1ST SEM TO 5TH SEM)...
I...
ok, I have been recently testing out all the questions I ask.
consider a simple set up Pc1 <-->SW1<-->R<-->SW2<-->PC2
now, given that Pc1 and Pc2 are in same vlan(default vlan...