Queries regarding C-DAC counseling <CDAC : Second Round Of Counseling>>
Hi All
Hope every1 is doing good 😀
I have got 935 Rank (A+B+C) in CDAC. I have got Mumbai-TICA for PD-DVLSI course in 1st round of counseling.
But I don't know much about this campus. Could any1 please help me with some of my doubts:
Now my question is, IS THERE ANY CHANCE THAT I CAN GET VLSI PUNE, HYD, or BANGALORE at this RANK-935?
3. Can I change my choice preferences during 2nd round of counseling?
Please reply me if anyone have any idea regarding above queries. I will be really gr8ful for this help.
Many Thanks in advance 😀
Hope every1 is doing good 😀
I have got 935 Rank (A+B+C) in CDAC. I have got Mumbai-TICA for PD-DVLSI course in 1st round of counseling.
But I don't know much about this campus. Could any1 please help me with some of my doubts:
- How is Mumbai-TICA learning and placement vise for VLSI course?
- I have given below preferences:
- VLSI- Pune C-DAC
- VLSI- Hyderabad
- VLSI- Bangalore
- VLSI- Mumbai TICA
- Embedded- Hyd
- Embedded- Pune Sunbeam
- Embedded- Pune C-DAC
- Embedded- Bangalore
3. Can I change my choice preferences during 2nd round of counseling?
Please reply me if anyone have any idea regarding above queries. I will be really gr8ful for this help.
Many Thanks in advance 😀
Replies
You are reading an archived discussion.
Related Posts
I am a second year mechanical engineering student looking for a internship or training programme this summer that is after my second year possibly in a metropolitan city like jaipur,bombay,banglore...
Earlier one needs to have a good in-depth knowledge of the subject, whether it is telephone systems, TCP/IP protocol, Operating systems, Network topology and Services along with a very good...
The good old crystal radio set.
I had made one more than sixty five years back. Only the local AM station would work.
The 3D printing part can be skipped....
Many of the input signals have desired frequency, waveform but this signals cannot be used because of its small amplitude. This is because the circuits or the devices need desired...
Hi everyone
Which has more strength Joining same materials(Steel+Steel) or Joining two different materials(Steel+cast iron) ?