[HELP] Electronic Drum Set - PC Controller

Good day, CEs!

I am here to ask a help from you guys.
I wanted to create my own Electronic Drum Set through using "Piezo Transducer".

And the plan is, I want this drum to be connected as a function of a keyboard.
Example: If I open a blank Notepad, connect the finished drumset, and hits a certain drum rapidly, Notepad will register "aaaaaaaaa", or something like that.
If you have PCB designs, or circuit diagrams, please do share. 😀

For those who will help, I'll appreciate it and THANK YOU VERY MUCH!
I hope I'll can contribute something later. 😀

Replies

You are reading an archived discussion.

Related Posts

respected sir, i am planning to give the GRE exam to pursue MS in chemical engineering abroad...the problem is that i don't know in which country should i pursue my...
I am stuck in between a problem. Part of where I am doubtful is as follows. 400KJ of energy is transferred from a source at 1000K to a 2 kg...
The rotor of the alternator, does not contain a permanent magnet , but a coil with pole pieces arrangement, which then serves as an electromagnet. but in order to make...
Guys please help me out with this..im searchin for an android project for my final year and this one seem to have caught my interest..i got the vague idea about...
I AM A SECOND YEAR ELECTRICAL ENGINEERING STUDENT I WANT TO UTILIZE MY WINTER BY DOING SOME TRAINING PLZ HELP WHAT WOULD BE BEST PLZ ALSO TELL WHAT TO DO...