Control I/O by interfacing particle photon with PLC

pikolo23
pikolo23
@pikolo23-XyyP17 • Oct 26, 2024

Hi I wanted to control the output devices by interfacing PLC with particle photon and by using 4-20mA current loop receiver which reads the 4-20mA sensor readings and make the multiple output devices (connected with PLC) work accordingly(as per coded by Particle photon)

What hardware should we use to interface the particle photon with PLC

Suggestion from expertise in this field will be very helpful
thank you

Like 0 Replies 2

Replies

Welcome, guest

Join CrazyEngineers to reply, ask questions, and participate in conversations.

Sign up Log in

CrazyEngineers powered by Jatra Community Platform

  • herebo27
    herebo27

    @herebo27-G82qNh • Apr 15, 2018

    This one is quite confusing but
    After checking your links mentioned in your question and with slight knowledge about your problem i was able to check out some hardware
    but 1st you need to learn about these hardware functions
    you can interface modbus with particle photon or you can also check the current receivers with different channels and their expansion there are many devices available as per your requirement.
    hope it help you out

    0
  • Harshad Italiya
    Harshad Italiya

    @harshad-ukH5ww • Apr 21, 2018

    #-Link-Snipped-#
    Do you have TTL - Serial Interface on your PLC? If Yes then you can connect PLC and Photon by Serial Interface.

    0