1. Home >
  2. Apps >
  3. Groups >

Automobile theft control system using CAN Controller

Question asked by Sanjay V in #Mechanical on Feb 12, 2015
Sanjay V
Sanjay V · Feb 12, 2015
Rank E2 - BEGINNER
Project Abstract / Summary : AUTOMOBILE THEFT CONTROL SYSTEM USING CAN
•The goal of the project is to develop security for vehicles.
•To use wireless technology for effective communication with the engine of the vehicle.


The objective of the project is to design a system to prevent or control the theft of the vehicle.CAN controlled system enables locking of the engine from a remote place by the owner .Speed of the vehicle and the engine can be controlled .GPS and GSM enabled system helps to locate the street wise tracking of the vehicle.Finger Vein ID, used in this work is the most secure as the vein patterns are unique for each individual.The developed system makes use of Finger Vein Scanner that is interfaced with the engine of the vehicle through Engine Control Module(ECM) & Control Area Network (CAN) Bus, which is in turn, communicated to the ECM. The developed system accept the message and broadcasted to the Vehicle Network through CAN Bus.

The project id designed to reduce the theft of vehicles by a cost- efficient system.

Why did you choose to work on this project topic : Avoiding Vehicle Theft is making buzz in present automobile industry. Design and development of a theft control system for an automobile, can be achieved by making use of GPS feature of mobile phone. The developed system makes use of Finger Vein Scanner that is interfaced with the engine of the vehicle through Engine Control Module(ECM) & Control Area Network (CAN) Bus, which is in turn, communicated to the ECM. The Vehicle being stolen can be stopped by using GPS feature of mobile phone and this information is used by the owner of the vehicle for future processing. The owner sends the message to the mobile which is embedded in the vehicle which has stolen which in turn controls the vehicles engine by locking the working of the engine immediately. The developed system accept the message and broadcasted to the Vehicle Network through CAN Bus. The engine can be unlocked only by the owner of the vehicle by sending the message again. The goal behind the design is to develop security for vehicles and embedded system to communicate with engine of the vehicle.

Project Category : Electrical / Electronics / Communication
------------------------------------------------------
Institute/College Name: Easwari Engineering College
City: Chennai
State: Tamilnadu
Participating Team From: Final Year Posted in: #Mechanical

You must log-in or sign-up to reply to this post.

Click to Log-In or Sign-Up