CrazyEngineers
CrazyEngineers
Franck

Franck

Member

Franck is a member of CrazyEngineers since Mar 23, 2012

Member since

Mar 23, 2012

Last active

Sep 2, 2012

Posts contributed

27

Recent posts

Apr 11, 2012
Hi godfather, I can send any value now. I found out last week.But still I have to implement it to my project using the SPI communication from one pic to...
Apr 7, 2012
Hi godfather, At the moment I cannot submit yet my project on your website because the process of my university but i will be please to share it just after...
Apr 6, 2012
I have got the blinking back (connection pb). But I am still receiving 0 in tx_buf[0].
Apr 6, 2012
Yes. I modified a bit the code to get the 1 in the tx_buf because I was getting 44 with the following codetx_buf[1],*READING;. Now the transmitter is not blinking anymore(the...
Apr 6, 2012
Hi godfather, which register enable me to see the data received instead of the using the LED because I am receiving a data but not sure if it is the...
Apr 6, 2012
Yes the transmission LED blinks perfectly.I will removed the the checksum from the receiver and see what happen.
Apr 5, 2012
Hi godfather, I've tried to modify the RFM70 code to send any value let's say 1 from the Master to the Slave but the Slave part is not receiving the...
Apr 3, 2012
No problem godfather, I will post the project video.👍
Apr 2, 2012
Yes the SPI works perfectly on the other side too. The transmission and reception is working from both side now. The green and red light are blinking alternatively on the...
Apr 2, 2012
Hello godfather, Just to let you know that I have got the SPI working. I get the XYZ=0x0F from the XYZ=SPI_Read_Reg(CONFIG); The RED LED from the master is blinking each...
Home Channels Search Login Register