SAIYAM KUMAR

SAIYAM KUMAR

Member

Member since
Jan 5, 2017
Last active
Mar 12, 2017
Total activities
0

Activity feed

Recent contributions

  1. #Threads

    2ca60f33-1fee-4ffe-a56c-668562c3f567

    The profile decides the tooth thickness. Google some images.

  2. #Threads

    7c7744f1-4c79-4752-8525-bd25e80bea61

    No sir. I have searched about it enough on internet. My confusion is does the module has any relation with the tooth...

  3. #Threads

    Gear design

    Can anyone help me with the module of spur gear design. I know that module is basically distance between addendum and pitch...

  4. #Threads

    5b297dcc-af4e-42a1-be48-7134ea86591e

    can you help me out with the calculations of springs. i am using a compression helical steel spring. the weight on the...

  5. #Threads

    8110611a-421b-48ab-9293-c6909fce5bf2

    thank you so much 😀

  6. #Threads

    5e5328d1-94e0-4675-a65c-c6ef506a7d3e

    also tell me about the belt length which has to be mounted on the crank through the motor

  7. #Threads

    45e0db86-5b01-4f35-8acd-6674319983c3

    well i have made some calculations. to get a stroke of 2 mm i will have to offset my crank arm from...

  8. #Threads

    4f2cd457-75d3-4820-935d-1fb9f6ee067d

    thank you so much. it would indeed help me alot. please tell me about the crank. its diameter is going to be...

  9. #Threads

    f22618ce-7a99-4f65-87ae-e543a48b7e68

    yes i know the stroke length. it is twice of amplitude so it is around 2mm. yes the pan is horizontal and...

  10. #Threads

    faba81a3-945f-461d-8810-3bbe1b57e96f

    correction in the formula W is the width of the pan =18 inch d is the depth of the material=1inch

  11. #Threads

    f600b761-b522-4287-a32a-6410c9945c5d

    there is a formula to calculate the linear flow rate of the load. It is TPH=WdBDs/4800 TPH is capacity in tonnes per...

  12. #Threads

    b1e059af-f317-4a33-b7f3-109c95c18e89

    ok i ll clear u the concept. i need to provide a vibratory motion to a 8 foot pan through a motor...

  13. #Threads

    186d5c1c-3528-4248-a536-ea887a561c66

    Yes i need the calculations for crank arm length, strength bearing design. At the end of the crank arm is a 16...

  14. #Threads

    4da0546d-3051-40ab-a69b-99503103bfdd

    Yes i need the calculations for crank arm length, strength bearing design. At the end of the crank arm is a 16...

  15. #Threads

    8fcd7341-3027-4c40-a3b8-23467b71d531

    Yes i Jay KostaWhat type of crank calculations do you need? Crank arm length? Crank arm strength? Crank bearing design / strength?...

  16. #Threads

    crank and crank arm calculations

    hi i want to give a motor driven crank drive to a vibratory conveyor. i have done calculations on motor rpm required....