KaiL

KaiL

Member

Member since
Jul 4, 2011
Last active
Aug 3, 2011
Total activities
0

Activity feed

Recent contributions

  1. #Threads

    0e408b00-aa40-48ab-a646-dfb1e55e0811

    KaiLNot really.my bad I write reply wrongly. it should be yes

  2. #Threads

    b2def2a2-9153-423f-bafe-2bcb63e4e814

    bioramaniThat should work. Do you not have any electronic hobby shop where you can buy small lengths such wires?Not really.

  3. #Threads

    f7bb1736-cb71-4040-808b-de5e7b46a620

    bioramani1.51 Amps is small. Any hook up wire should work. Try a 0.5 mm[SUP]2 [/SUP]conductor. #-Link-Snipped-#So does this wire work for me?...

  4. #Threads

    56bcb001-248d-4606-90be-27d3cf85cd45

    Hi again. Could you assist me with one problem? My circuit supply current is about 1.51 Ampere and I am wondering how...

  5. #Threads

    c09d1a7a-ca90-4880-827d-f9fe6156533c

    I see. Thanks

  6. #Threads

    f72e7f72-484c-4b64-a1c5-4a291a189f6d

    bioramaniI still feel that you will be better off not using a voltage divider for the gate trigger. The circuit I had...

  7. #Threads

    80172fae-1c44-4f39-8f4d-15b087de5de2

    #-Link-Snipped-# Uploaded with #-Link-Snipped-# Thanks again for your help. Maybe I have calculated wrongly somewhere in my circuit. Either the value of...

  8. #Threads

    2c79fc2f-591c-46bf-b158-fcfc2d894651

    Could I check with you why the value of gate current is about 1 milli amp? Isn't the value of gate current...

  9. #Threads

    7b3b5fef-600b-4cfb-a7b3-91887492dcdc

    #-Link-Snipped-# Uploaded with #-Link-Snipped-# Hi again. I have tried the circuit that you have come up using MultiSim but it doesn't work...

  10. #Threads

    7a6a6564-f678-4360-9240-d65f5db53c44

    bioramaniWhy not look at the whole circuit again? What you need to do is to disable the gate of SCR 2 when...

  11. #Threads

    0f54a77c-b693-4305-ad2a-4ef852d08191

    bioramaniMCR-22 has a gate trigger current as low as 30 micro amps. The circuit shown in your diagram can easily trigger D3....

  12. #Threads

    6a4a34b6-aa40-4bbe-942b-bc2979e2edf5

    bioramaniWhat purpose does D4 serve? Can be removed I think. A Zener diode in series with J3 should help.From what my lecturer...