Centrifugal Fan - Modifications

Hi! Me new here.

Have a centrifugal fan (Boiler ID) of 120,000 m3/Hr capacity, handling a max of 80,000 m3/Hr of Boiler flue gases. Fan discharges max head 2.3 kpa at 980 rpm.
The fan has central suction and side ways delivery at 40 deg angle.
We plan to rotate the fan delivery to vertical (delivery right on top) and take discharge to process utilisation (Y connection), whenever requirement arises. Normally the discharge let in to atmosphere through a 42m stack.

Is it technically feasible, to derive the planned outcome. The discharge to travel for about 80m (approx) for process utilisation. Ducting size would be 1400mm.

Thank you very much for your time.

Regards
YK Rao

Replies

You are reading an archived discussion.

Related Posts

hi 😉 im student at faculty of engineering at Minia University in Egypt at computer and systems engineering department
Hi to all, new comer. working in the marine & power management.
Manisha and Abhishek Jain, an IIT pair, have taken the initiative to show the consumer how they can save power and help conserve the eco system. They have put together...
what are recommended courses for electrical designing engineering after Btech-EEE
i want to buy a assembled desktop, please let me know a good configuration under 19 k