3D Printing - Up and Running (Literally)
Quote:
Engineers and shoe designers at New Balance Athletic Shoes Inc., Boston, are using 3D printing to make shoes for elite runners (professionals and Olympians) in hopes of improving their performance. The company uses an EOSINT 395 3D printer from EOS to custom-build spike plates, the bottom part of the shoe that contains a pattern of spikes to give runners more traction as they run. The machine creates parts out of plastic using a proprietary nylon powder and laser sintering.
Endquote
#-Link-Snipped-#
Engineers and shoe designers at New Balance Athletic Shoes Inc., Boston, are using 3D printing to make shoes for elite runners (professionals and Olympians) in hopes of improving their performance. The company uses an EOSINT 395 3D printer from EOS to custom-build spike plates, the bottom part of the shoe that contains a pattern of spikes to give runners more traction as they run. The machine creates parts out of plastic using a proprietary nylon powder and laser sintering.
Endquote
#-Link-Snipped-#
Replies
You are reading an archived discussion.
Related Posts
What next?
Multi storey buildings and nano-elevators to move data between storeys invade IC architecture.
Cross fertilization at its CE best.
https://machinedesign.com/embedded/h...ticle_3_b&YM_RID=CPG05000000559845&YM_MID=712
When describing Neutrinos Frederick Reines, an American physicist famously said, "They are the most tiny quantity of reality ever imagined by a human being." The subatomic particles created from the...
USB Type-C connector could hold the key to the power and connectivity of the future electronic gadgets. I decided to write this post to talk about the connector, its significance...
Moto X(first Gen.) Vs Moto G(2nd Gen.)
Which is better if you consider the performance as the parameter within the exceptional price???
@Rajni Jain
@Kaustubh Katdare
@Yogesh Borkar
@Koushal Patel...
Recently, I used a cab service in Mumbai. The driver was nice, humble. I kept his contact number for future use. I do not know his full name, and am...