pc digital clock via parallel port using assembly language in tasm
hi, we have this project and we already have a code and the circuit but it is not working..
it's supposed to display the hours and minutes
the problems are:
1. the hour display is not displaying anything
2. the minute displays but it is advanced by one minute
please help us.
so here's the code:
#-Link-Snipped-#
it's supposed to display the hours and minutes
the problems are:
1. the hour display is not displaying anything
2. the minute displays but it is advanced by one minute
please help us.
so here's the code:
TITLE CLOCK.ASM DOSSEG .MODEL SMALL .STACK 0100H .DATA PRINTERPORTBASEADDRESS equ 378h .CODE MAIN PROC MOV AX, @DATA MOV DS, AX CALL RTIME ; READ TIME CALL DisplayTime ;DISPLAY TIME MOV AX, 4C00H INT 21H MAIN ENDP RTIME PROC MOV AH, 02H INT 1AH RET ; CH - HOUR ; CL - MINUTES ; DH - SECONDS RTIME ENDP DisplayTime PROC push DX ; was DH push CX ; was CL ; mov AL,CH mov DX,PRINTERPORTBASEADDRESS out DX,AL mov AL,01h mov DX,PRINTERPORTBASEADDRESS+2 out DX,AL ; enable display call Delay ; mov AL,00h mov DX,PRINTERPORTBASEADDRESS+2 out DX,AL pop AX ; pop CL (minutes) mov DX,PRINTERPORTBASEADDRESS out DX,AL mov AL,02h mov DX,PRINTERPORTBASEADDRESS+2 out DX,AL ; enable display call Delay ; mov AL,00h mov DX,PRINTERPORTBASEADDRESS+2 out DX,AL pop AX ; pop DH (seconds) mov AL,AH mov DX,PRINTERPORTBASEADDRESS out DX,AL mov AL,08h mov DX,PRINTERPORTBASEADDRESS+2 out DX,AL ; enable display call Delay ; mov DX,PRINTERPORTBASEADDRESS+2 mov AL,00h out DX,AL ret DisplayTime ENDP Delay Proc MOV CX, 00100h X: PUSH CX MOV CX, 0FFFFh Y: LOOP Y POP CX LOOP X RET Delay ENDP ENDand the circuit:
#-Link-Snipped-#
Replies
-
maoninplease help. 😔
You are reading an archived discussion.
Related Posts
These guides from GlobalSpecs are not advertisements for any specific product. They give helpful technical info, which will help engineers select appropriate products.
CR4 - Blog: How to Select Industrial...
Salary
Under HSE’s current pay arrangements, subject to an effective level of performance, staff progress annually towards the maximum of their pay scale. The maximum of the pay range for...
Some engineers feel that Engineers and designers have been degraded into glorified CAD people. It is all about money and cost control now, [not] design engineering.
I have noticed that...
Hey,
I'm Nikhil. Currently in 5th Semester and A Future Mechanical Engineer[Well, Thats the Plan for now 😉 ]
Me and few of my Friends are planning for M.S and...
Free Fortune Cookie Message Generator - Create, Print Personalized Cookie Fortunes