Wireless Voting System by RFM12 Module
hi
i want to use rfm12 module to send the vote of participantes to a receiver
there are 50 transmitters (one for )
the problem is that ,if two person press a key on the transmitter, it will happen error and no data will receive by receiver
so i want to use rfm12 and use diffrent operation frequency to seperate this 50 transmitter
is it possible?
i want to use rfm12 module to send the vote of participantes to a receiver
there are 50 transmitters (one for )
the problem is that ,if two person press a key on the transmitter, it will happen error and no data will receive by receiver
so i want to use rfm12 and use diffrent operation frequency to seperate this 50 transmitter
is it possible?
Replies
You are reading an archived discussion.
Related Posts
Greetings!
I have small confusion with IS 2911 (Part 1/ Section 2). I have attached the screen shot of spacing of pile part which I read in IS 2911. Actually...
I got 75% in btech. But my college was not good enough to give us placement. So in order to get job in wch sector should i go ....... I...
Please delete this thread
Generally known for its back to back launches of budget phones, Micromax seems to be on a new spree now. Until recently, Micromax had only few laptops under their name....
India is ready to experience the exhilarating view as the first ever Land Rover with the SVR badge goes accelerates from 0 to 100 km per hour in just 4.7...