How Many of You People are Aware of Air-Run Engines

[TheBugInYou]

Originally Posted by Nidhinkoroth

Hi Friend (TheBugInYou),
I am 3rd year Mechanical Engg Student .Now I am looking for a project. Pls tell me can u give the project details if i provided my knowlege in Air-Run Engines ?

You Are Welcome Dear...

[Nidhinkoroth]

Can i get your email id?

[The_Big_K]

I request all members to discuss on forums (that's why we all are here ) . Information discussed here will be available to others as well.

-The Big K-

[Nidhinkoroth]

AIR ENGINES

The Air Car can travel up to 120 miles on one tank of air, costing only $2 to fill, ( or free if you use a solar panel to run a DC motor to your compressor) There are many Gas stations that also do not charge for there air. The only draw back is that this engine is a bit loud! Any gasoline engine can be converted to run on compressed air.

The gas tank will no longer be needed, The Carburetor, exhaust
system and cooling system will also no longer be needed. By using air hoses and homemade electric air selenoid switches ( or see Graingers.com, I think they sell these type of pnumatic air swithches.) We can make this by using air guns connected to HV solenoids. When 120 vdc or 400 vdc of electricity enters the coil it will pull the metal plunger back into the coil and at the same time the metal rod plunger will be pulling down the air valve handle on the air gun or guns. If you make your own homemade Solenoid it is cheaper, I would suggest that you use # 30 copper coated wire with about 800 to 1000 turns around a plastic tube, such as PVC pipe. Your solenoid can be about 5" in length and you will need to glue a 1/2" piece of the same size diameter of your metal rod. when electricity is appllied it will turn this metal into a high power magnet and thus increasing the torque of the pull. The spark plug wire is already timed and gives of about 3,000 vac, which we can use to trigger your solinoid or a HV thryristor switch. another words we can build an elctronic switch using a High voltage Thryristor transistor which can be made to turn on the 120 - 400 vdc power to your HV Solenoid. A Solenoid can be designed or bought to run on the High Voltage / low amperage coming from the Lawn mower spark plug wire. Once your automatic air valve is done and is working well, we will then want to buy a High Efficient Air Compressor Motor. Connect this to the shaft of your lawn mower. Then connect the air output to a 2nd input of your air tank! The motor can now perform work as well as replinish itself with air.

[Nidhinkoroth]

[Nidhinkoroth]

Pls Tell whether the information i provided is correct or not .If it is correct i will post more

[Nidhinkoroth]

Ple tell How much is the approximate cost of this project?

[einstein89]

yo i will tell u tht this project is to just create pollution somewhere else!
so for compressing air , u may need compressors to work on electricity and to make electricity , u will need , something called generating , now there is pollution , so it will create huge pollution! according to me.!

[TheBugInYou]

Originally Posted by Nidhinkoroth

Can i get your email id?

pm me man instead

[crook]

I have been following this thread since long. Looking forward to further updates!!